Home » Articles and guides 9M31: WR84 and Pin socket

9M31: WR84 and pin socket

9M31 is a magnetron for the X-band transmission channel, in which Nisshinbo indicates a peak output power of 50 kW. Its design profile consists of the WR84 waveguide output, power supply via the Pin socket contact connection and heat removal conditions. In RadarStation’s own card, this model is presented separately. Consider which component the customer receives and which parts of the transmitter remain outside the boundaries of its delivery.

Request a quote
9M31 - photo of our catalog card
9M31: Photo of your own catalog card. The design of the component is shown; the marking, condition and composition of the actually proposed item are separately confirmed.

Model within an existing transmitter

Magnetron energy is formed in impulses and enters the microwave tract provided. Therefore, the 50 kW record characterizes the peak power of the 9M31, rather than the continuous output of the product. The component’s datasheet does not specify the detection range of the entire radar; the result is influenced by other parts of the station and the observation conditions.

For the supply of a ship, this means a specific item of purchase. The order for the 9M31 refers to a magnetron provided for a particular transmitting unit. If the service needs a transmitter assembly, exchange node or other parts of the radar, the composition of such quotation will be wider. The price of a component cannot be used as an estimate of any of these decisions.

The current manufacturer page specifies a fixed window 9380-9440 MHz. The frequency differences between 9M31 and 2J55 have already been considered in [separate comparison](/st/magnetrony-2j55-9m31-chastota-i-tochnyi-zakaz.html). More importantly, even the exact frequency does not describe the interfacing of the 9M31 itself with the transmitter.

WR84 - a specific output part

The RF output interface for 9M31 is listed as Waveguide: WR84. This is a useful characteristic of a particular product. The waveguide designation must be retained in technical agreement; the general wording "X-band output" is too broad to describe the connection to the established path.

The buyer can provide the service organization with information about the interfacing retained and the desired repair item. If a new response part, transition element or attachment is required in the transmitting unit, these should be called in the scope of supply. The presence of a waveguide output on a magnetron does not in itself mean the inclusion of all surrounding details.

The output of WR84 cannot be automatically equated with another waveguide configuration just because it is also X-band. The intended node and its documentation are needed to assess applicability. This is a question of transmitter design, which is not solved by substituting a similar photo or one matching parameter from the common table.

Power supply via Pin socket

Power supply interface: Pin socket type. The manufacturer separates this power supply interface from the microwave output. When discussing the kit, it is important to distinguish between the device itself and the available response contact connection that relates to the installed equipment.

Such a configuration should not be described as a set of arbitrary wires to connect to any source. For delivery, it is useful to determine in advance whether the regular response part is preserved and whether there is a conclusion about its condition. If it is needed separately, the exact product is included in the inventory of documentation. Buying a magnetron does not automatically replace all the power supply elements around it.

This review does not specify the appointment of contacts, the order of connection or the verification of the high-voltage circuit. The commercial task is to agree on the correct configuration of the parts and the necessary accessories so that the service receives the intended component, rather than an indefinite set for remaking the transmitter.

Mass and thermal configuration

The current factory card indicates a weight of 1.9 kg and cooling Air/Forced air. This information is in addition to the 9M31 profile: the mechanical placement and heat removal conditions must be appropriate for the intended transmitting unit. The fan, ductwork and the entire cooling system do not automatically become part of the order due to such a feature string.

In the exact sheet DS-9M31 Rev. 04E dated November 8, 2024, the anode temperature is limited to 100 °C. This is the absolute limit of the document, not the recommended operating temperature. The possibility of compliance with the conditions relates to the device of the transmitter and its serviceability; a separate new magnetron does not confirm the readiness of the entire heat path.

How to understand the conditions of impulse work

On the short page of the model, the filling factor is 0.001 and the duration is 1.00 μs. In the absolute limits section of DS-9M31 04E, the maximum duration is 2.5 μs. These are different data contexts. Such a difference cannot be declared a change in the model or turned into permission to choose the mode of operation.

The document itself stipulates that absolute limits are not necessarily permissible at the same time. They are used by the technical side when assessing applicability to the equipment. For the purchase, it is enough to keep the exact model and the intended transmitting unit; the advertising description should not assign modulator settings or promise to improve the characteristics of the existing radar.

Your card and specific delivery

In RadarStation, the price is indicated in the product card and the warehouse mark. The current price, balance, condition, marking and set of documents are confirmed by quotation. The catalogue image shows the 9M31 design, but does not certify the origin, production or condition of the current specimen. The terms of a specific delivery are fixed separately from the general datasheet of the model.

Specify the radar transmitting unit, the number and requirements of the service organization. The necessary accessories are combined with the magnetron in an agreed set with a common price; the work is allocated separately. To transfer equipment to Russia or Kazakhstan, add the city or port, the recipient and the required date.

9M31 in our catalogue

9M319M31 - X-band magnetron.

The current price is indicated in the product card. for the required set, the total price is indicated.

Request a quote

Primary source: Nisshinbo: 9M31 - parameters, WR84, Pin socket, weight and cooling · Nisshinbo DS-9M31 Rev. 04E, November 8, 2024 – Specifications and absolute limits.

All technical guide RadarStation