RS and RKO rules: practical application
AIS antenna: height and an unobstructed horizon
The AIS can turn on properly, show its own data and transmit targets to the radar, although the location of its VHF antenna was poorly chosen. Therefore, the replacement of equipment should include checking the antenna post. It is important to consider not only the height, but also obstacles, operating frequencies, manufacturer’s recommendations and the actual completeness of the order.

What paragraph 4.3.1 requires
The technical guide applies to clause 4.3.1 of Part V, Navigation Equipment, of the RS Rules for the Equipment of Sea-Going Ships, edition 01.01.2026. Under clause 1.1.1, this Part covers self-propelled ships not engaged on international voyages. For other operating conditions, the applicable framework must be established separately. Instructions from the flag State maritime administration are taken into account under clause 1.1.3 and applied in the event of a conflict.
The rule requires the AIS VHF antenna to be installed at the greatest practicable height, providing effective transmission and reception on all operating frequencies. As far as possible, the propagation path should be unobstructed around the entire horizon. The manufacturer's recommendations must also be taken into account. General clause 4.1.1 likewise links antenna-location selection to the equipment documentation.
The height requirement cannot be reduced to 'use the highest available bolt'. The complete antenna location must be assessed: nearby metal structures, their positions, the cable route and the manufacturer's restrictions. A location that suited the previous antenna must be reassessed for the new equipment configuration.
VHF antenna and satellite antenna differ
AIS equipment may use antennas for different functions. Clause 4.3.1 concerns the VHF antenna used for AIS radio communications. It cannot automatically be treated as the sole siting requirement for a satellite receiving antenna. Navigation-system receiving antennas are covered separately in section 4.4 of Part V.
The diagram should identify each antenna's function and the actual unit it serves. This avoids an enquiry using the single word 'antenna' when the supplier and installer mean different items.
How to check the NSR NSI-1000 kit
NSR NSI-1000 is a Class A marine AIS. In the manufacturer's brochure reviewed, version 16.0, the NGA-100 GNSS antenna is listed as standard equipment and the NVA-100 VHF antenna as an optional item. The contents of the actual quotation therefore need separate checking: inclusion of a satellite antenna does not automatically include a VHF antenna.
If the existing VHF antenna is retained, provide its designation, documentation, condition and cable details. Suitability cannot be promised from appearance or connector type alone. Package contents must be confirmed against current documentation for the selected version, and placement against the vessel design.
Information to provide before selecting a location
| Background data | Purpose of the information |
|---|---|
| Vessel, class and operating area | Identify the applicable regulatory framework |
| Plan of antenna posts and photos | See obstacles and nearby equipment |
| Model and function of each antenna | Separate VHF exchange and GNSS reception |
| Make, length and condition of cable | Identify the cable route and components to be retained |
| Manufacturer's documentation | Check the requirements for the actual equipment version |
Once the location is selected, the design must record the antenna, mounting position, cable and connections. Post-installation testing must cover the actual installation; simply switching on the AIS display is no substitute. Radar target display and fault alarms remain separate installation tasks.
In the request for quotation, list the required transponder, control unit, VHF and GNSS antennas, parts to be retained and work required. Both parties can then compare the package item by item, rather than relying on the ambiguous description 'complete AIS'.
Sources
The regulatory framework the official Part V of the RS Rules, paragraphs 1.1.1. to 1.1.3., 4.1.1. and 4.3.1. Marine role of model confirmed NSR manufacturer; package contents were assessed using the manufacturer's NSI-1000 brochure, version 16.0. The antenna-location illustration is schematic and specifies no heights or installation clearances.