Home » Articles and guides » RS and RKO rules

RS and RKO rules: practical application

Radar antenna: coverage matters more than spare mounting space

When replacing a radar, an empty platform on the mast may seem ready for the new scanner. Selection, however, requires knowing what will obstruct coverage, how loading changes the situation and whether maintenance access remains available. This information is needed before agreeing the supply, especially if part of the existing antenna assembly is retained.

In the catalog RadarStation presented KODEN MDC-7912P radar and a separate Sperry Marine 65606/A. These are different order items: a radar package and a specific antenna assembly. Having both product pages does not establish compatibility between them.

Author's drawing of a cargo ship with a radar antenna on the mast and an open sea horizon
Original editorial illustration. The layout is schematic; the drawing specifies no installation dimensions and does not depict a particular product version.

Which document is considered

The regulatory example is section 4.2 of Part V, Navigation Equipment, of the RS Rules for the Equipment of Sea-Going Ships, version 01.01.2026. Under clause 1.1.1, this Part concerns self-propelled ships not engaged on international voyages and equipment intended for them. Applicability to the particular vessel and additional flag-administration instructions must be established before selecting the siting requirement.

The following therefore explains how to prepare information for an installation discussion. It is neither an instruction for relocating an antenna yourself nor a compliance assessment of the existing mast.

Why “higher” is not enough

Clause 4.2.1 links antenna location to horizon coverage, close-target detection, sea clutter and multiple reflections, as well as permissible human exposure to emissions. Clause 4.2.5 separately addresses reflections from vessel structures and deck cargo.

Practically, this means that a single photograph of an empty deck does not describe all the conditions. For example, a new crane or load may be more significant than a slight change in the height of the scanner itself. In the query, it is useful to show the usual load, the extreme positions of mobile structures and the places where people are. Radiation impact assessment is performed according to applicable documentation and project data.

Information needed to assess radar coverage

Clause 4.2.2 concerns the sea-surface area obscured ahead of the vessel and shadow sectors. It takes cargo, draught and trim into account. Saying 'coverage is good; the antenna is on the roof' provides insufficient information for that assessment.

Background dataQuestion the information helps answer
Side view of the vessel and plan with antenna positionWhere obstacles lie relative to the scanner
Dimensions and expected operating conditionsHow coverage conditions change
Cargo, cranes, smokestacks and neighbouring equipmentWhat obstacles cannot be excluded from consideration
Existing coverage diagram, if availableWhat was recorded for the previous installation
Exact model of the old and proposed scannerWhat actually changes when you replace

This is an editorial enquiry checklist. It does not replace layout calculations and approval. Under clause 3.4.6.3, all-round coverage diagrams showing shadow sectors are provided at the display positions; updating these documents after installation changes should be included in the scope of work.

Maintenance access is part of location selection

Clauses 4.2.7–4.2.8 concern antenna access, the maintenance platform and location relative to areas occupied by people. If scanner dimensions increase, show guarding, access and rotational clearance separately. Being able to secure the equipment does not establish that subsequent inspection will be convenient.

If ordering only 65606/A, list the turning unit, drive and mountings to be retained. Confirm their suitability from exact designations and documentation. If considering a new KODEN MDC-7912P, request the complete offered configuration and a list of issues concerning the existing antenna/mast arrangement. Lead time, availability, documents and work must be stated in the quotation.

Sources

Checked on 25.10.2026, Astana time: the official RS publication record, version 01.01.2026, bulletin No. 25-251297; Part V, ND No. 2-020101-171, clauses 1.1.1, 1.1.3, 3.4.6.3, 4.2.1–4.2.2, 4.2.5, 4.2.7–4.2.8.

The original illustration depicts the task schematically. It prescribes no mandatory layout and does not depict an approved installation of a specific model.

Send project details for a quotation

All materials in the series