Home » Articles and guides MDC-7912P: 19-inch radar post KODEN

MDC-7912P: a 19-inch KODEN radar station

KODEN MDC-7912P is an X-band maritime radar station with a 19-inch color display and a 12 kW transmitter. For her, choose an open antenna scanner of 4, 6 or 9 feet and agree on the composition of the entire post. In RadarStation, this model is represented by a separate card: the price and delivery time are requested for the desired configuration.

Request a quote
KODEN MDC-7912P - photo of our catalog card
MDC-7912P: own catalogue photo of the display and control panel. Antenna scanner and full delivery kit are not shown in the image.

How is the MDC-7912P post structured?

The manufacturer describes the MDC-7912P as a system with a display, a separate control unit and an antenna scanner. The screen and controls can be considered as parts of one workplace: the operator observes the situation on the display, and a separate panel allows you to coordinate the location of the control with the layout of the bridge.

For the buyer, this is more useful than one line with power. When preparing a replacement or a new post, you need to understand which parts of the system are actually required for delivery. The monitor with the remote in the photo does not mean that the entire antenna assembly, cables and additional devices are already included in the specified image.

The MDC-7912P has a 19-inch display. The numbers 12 in the designation of this model should not be mistaken for its diagonal: on the exact page of Koden, the model is associated with a 12 kW transmitter and a 19-inch screen. For the layout of the post, the dimensions of the corresponding blocks and the agreed composition are used, rather than assuming the short name of the goods.

Antenna scanner and scale range

For the MDC-7912P, the manufacturer specifies open antennas of 4, 6 or 9 feet. These are the configuration options of the antenna part, which must be named in the request. Recording a single radar model without selecting an antenna leaves an important element of the future kit uncertain.

The existing base, scanner location, cable route, and power supply are ship-specific. If you retain part of the old installation, their applicability is confirmed separately. Being able to order a certain antenna length does not mean that any option can be put in place without approval of the project.

In the characteristics of the MDC-7912P published scales 0.125-64 nautical miles. This is a range of scale selection, not a promise to detect any object at 64 miles. The actual observed environment depends on the conditions, purpose, and configuration of the system. For the purchase, it is useful to keep the exact model and the desired antenna-scanner part, without turning the upper scale into a guaranteed result.

TT/ARPA: tracking radar targets

For the MDC-7912P, the standard TT/ARPA function is declared with up to 100 targets and a choice of automatic or manual capture. This is work with targets detected by the radar channel. Having a feature helps to discuss the equipment of the post in detail, but does not mean that every object around the ship will necessarily be detected and accompanied.

When choosing a complex, it is important to determine what data is already available on the ship and what connections between the blocks are needed in the new composition. Delivery of an accompanying display does not by itself confirm the availability of all external data sources and connections. They are included in the draft post and the agreed specification.

The quotation on the MDC-7912P is therefore better viewed as the delivery of a specific system with clear boundaries. Existing suitable devices can be considered as part of the project if their preservation is confirmed. The new positions required clearly indicate that the price does not describe only the screen instead of a workable set of equipment.

AIS on the same screen

The model has an AIS interface for displaying up to 900 targets. This is a separate information layer: AIS messages and radar channel marks have different sources. Their joint presentation helps the operator to match the situation, but the presence of an AIS interface does not turn the display itself into a separately supplied AIS radio transmitter.

In the agreed set, you need to determine the source of AIS data and the connection with it. If the ship already has AIS, the use of AIS is considered for existing equipment. If a new source is needed, its designation and accessories are added to the composition in separate agreed items with the total cost of the kit.

The numbers 100 and 900 describe different claimed features of the model: TT tracking and AIS display. They should not be added to the promise of the number of automatically detected objects. Radar and information channels complement the working picture while retaining their separate functions.

Controls and version-specific documentation

Koden specifies automatic gain adjustment, STC sea interference handling, and the ability to control a remote trackball via USB. A separate staff panel remains an important part of the layout. If an additional trackball or other workplace is required, its availability in the supply must be agreed upon, rather than deduced from the overall functionality of the interface.

MDC-7912P belongs to the IMO Products line. Documents and the applicable configuration are agreed upon for the specific project and delivery. The name of the line does not replace the set of documents required by the customer and is not a universal permission to install any combination of blocks on any vessel.

The directory's own photo shows the display and control panel. Antenna scanner and a full set of connections on it are not presented. From this image, it is not possible to determine the final inventory, the status of the current proposed equipment or the selected antenna length.

Set and price on request

Our MDC-7912P card lists the price on request and delivery on order with a deadline on request. To calculate, a single composition is needed: display, control, scanner of the selected configuration, necessary cables and agreed accessories. The total price is requested for it; design, installation and commissioning works are designated separately.

Send information about the vessel, available radar, required antenna, retained devices and location of receipt in Russia or Kazakhstan. Add the desired date and document requirements – the quotation will be prepared for the specific post MDC-7912P.

Koden MDC-7912P in our catalog

KODEN MDC-7912PMDC-7912P - Koden radar with 19-inch display.

Price on request. Under the order - delivery time on request. The composition of the radar includes a coordinated display, control, scanner of the selected configuration, cables and accessories with a total kit price. The manufacturer, condition, documents, warranty and term are confirmed by quotation; the works are designated separately. The photo shows only the display and control panel.

Request a quote

Primary source: Koden: exact model of MDC-7912P, features and characteristics · Koden: line of marine radar and scanner options.

All technical guide RadarStation