Articles and guides / Two lines of APV-3M

Two cameras require two complete transmitter-receiver pairs

One pair of APVS-3M: transmitter and receiver
Catalogue illustration of one pair of APVS-3M: transmitter and receiver. For two independent lines, two such pairs are needed in the example; the labeling and composition of the proposed delivery are confirmed separately.

One set of APVS-3M - one transmitter and one receiver price on the product page. Two independent cameras need two complete sets: RUB 6,000 for four blocks.

Request a quote

Two analog cameras remain on the facility, and it is necessary to transmit their signals to the two inputs of the recorder by the selected twisted pairs. In the application, it is easy to mistake the word “pair”: it can mean a pair of conductors or a pair of devices. To purchase the APVS-3M, both ends of each independent video line must be counted.

Four blocks for two channels

In our quotation, one set of APVS-3M consists of a transmitter and a receiver. For the first camera, you need your transmitter on its side and your receiver at the corresponding entrance of the recorder. For the second camera, there's another pair. It's two transmitters and two receivers, not one receiver shared on both cameras.

The example involves two independent video signals and two recording inputs. A multiplexer, channel combination, or other special system is not included in the example. Two different signals cannot be automatically separated at the receiving end of a conventional channel.

Two pairs of devices and cable

A cable may contain multiple twisted pairs, but that doesn’t make one pair of APACs a multichannel device. For each line, a dedicated pair of conductors, terminal devices and a recorder input are recorded. The ability to use selected pairs of existing cables is evaluated by track conditions and documentation, without the promise of the operability of any cable.

One pair of conductors cannot be considered simultaneously an active Ethernet channel and a free analog video line. If the cable is already running the network, first find out the busy circuit and the suitability of the proposed solution. The mere presence of an RJ-45 connector or a familiar UTP does not determine the purpose of the connected device.

Power supply is calculated by device

Each transmitter and receiver must have power supply conditions. In the two-set example, these are four powered units; power supply cameras are also counted separately. This does not mean that you have to buy four separate adapters: the number of sources and the distribution of the circuits are determined by a consistent scheme.

APVS-3M is considered for analog full video signal. Two IP cameras or two different format sources do not become suitable just because of the correct number of sets. Before the purchase, you need accurate models of cameras and the recorder, the format of the exit and entrances. A similar housing or BNC connector does not replace this information.

What's included in 6,000 rubles

The calculation is based on the price of your own card: two complete sets of see the product page give see the product page for two pairs of transmitter-receiver. Cameras, recorder, cables, power supply, mounting, installation and transportation are not automatically included in this amount. If necessary, we agree the expanded composition with the total quotation price.

The manufacturer refers APVS-3M to discontinued models. Our quotation concerns the position from the warehouse list: the available quantity, condition and configuration are confirmed before the order. For delivery to Moscow, Kazan, Novosibirsk or another city of Russia and Kazakhstan, specify the address, number of independent lines and missing parts. So the request will be clear set, not ambiguous “need two pairs”.

Two separate channels

Camera 1Transmitter 1Isolated twisted pair 1Reception 1Entrance of the registrar 1
Camera 2Transmitter 2Isolated twisted pair 2Reception 2Registrar's entrance 2

Functional diagram of the number and purpose of devices. This is not an electrical connection scheme; power supply and installation are done according to the specific configuration documentation.

Procurement composition and basic calculation
Independent video linesFull sets and base cost
One camera → one input1 set: 1 transmitter + 1 receiver; see the product page
Two cameras → two inputs2 sets: 2 transmitters + 2 receivers; see the product page
Cables and power supplyAgree separately; not included in the basic calculation
Exact quotationThe number, markings, condition, format and conditions of the route are confirmed

Questions before buying

Will one receiver serve two independent transmitters?

In the described composition, this is not stated. Each independent line has its own transmitter-receiver pair.

Are two sets two blocks or four?

Four: two transmitters and two receivers. One of our basic sets contains a couple of devices.

see the product page includes cameras, power supply and cable.

Nope. This is the calculation of two basic sets of see the product page. The remaining parts and works are separately agreed by a general specification.

Our complete set

Signal format, line and composition of one set of APVS-3M

Delivery in Russia and Kazakhstan is agreed at the address and composition. The current price, available quantity and condition are confirmed before order.

Request a quote

Primary source: Tachyon: APVS-3M, the model is withdrawn from production. The name of the model is read in the manufacturer’s page; the end of its URL does not replace configuration.