Home » Articles and guides M1311L: design, UG-40 B/U output and cooling

M1311L: construction, UG-40 B/U output and cooling

M1311L is an X-band magnetron with a waveguide output of UG-40 B/U, an approximate mass of 1.6 kg and forced air cooling. Such a design profile is given in the New JRC archive sheet with the label 95-12. It is much more specific than the short 25 kW record: the output node, cooling and electrical conditions of the component itself are important for the existing transmitter.

Request a quote
M1311L - photo of our catalog card
Image of your own catalog card M1311L. Factory marking on the picture is not readable; the type and condition of the proposed product is confirmed separately.

What describes the factory sheet M1311L

The document relates M1311L to pulse magnetrons of fixed frequency with a range 9345–9405 MHz. In the line of peak output power is given the minimum 22,5 standard 25 kW. These columns refer to the characteristics in the terms of the document, rather than denoting different models. M1311L.

For the owner of the radar, such a datasheet is useful as a description of the source of microwave pulses of the transmitting channel. The magnetron itself does not contain an antenna, receiver, or image processing. Therefore, its characteristics do not alone determine the detection range, the sensitivity of the receiving tract or the state of the installed station.

Archival source: the label 95-12 should be saved when referenced to it. It does not specify the year of production of the proposed unit, the valid approval of the entire radar or the current production conditions. For delivery, it is required to link this type to the applicable equipment documentation and then identify the specific product offered.

UG-40 B/U: a separate design feature

Mechanical data from the M1311L indicates the output node UG-40 B/U. This is an important designation for comparison with the transmitting path. If a different flange is found in the next card, the fact that both components belong to the X-band does not make their attachment the same.

For example, in the current description of the M1475A, the manufacturer names a flange equivalent to UG-135/U. His [complete model technical guide](/st/m1475a-x-band-chastotnoe-okno-trakt-rls.html) is devoted to another design profile. Both models have published boundaries of 9345-9405 MHz, but this does not make their output nodes the same. The designations UG-40 B/U and UG-135/U cannot be tacitly replaced by the general word waveguide.

For the buyer, this means that the magnetron number must remain associated with the specific transmitting unit. The view of the output part, the base and the electrical connection complement this connection. The general image of the body helps to navigate, but applicability is determined not by one photo and not by power class.

Forced cooling and mass

The description of the M1311L expressly indicates forced air cooling. This is the condition of the component in the equipment. It cannot be rewrote as a natural cooling just because it is found in the passports of other magnetrons of the same range.

It does not follow from this requirement that the fan is included in every sale. M1311L. The airway, fan and other elements of the transmitting unit may relate to the retained radar design. If a service requires the supply of a cooling unit or unit assembly, this is a separate agreed composition, which must be named in the quotation.

The approximate mass of 1.6 kg refers to the magnetron, not the transport packaging or the entire transmitter. For the preparation of marine ZIP, this helps to distinguish between a separate component and a complete replacement unit. At the same time, such a mass does not give reason to choose a replacement for a similar size: mechanical parameters are considered together with the output, electrical configuration and equipment requirements.

Electrical operating conditions involve more than the heater

The archive sheet separately describes the incandescence during preheating and during operation. For the working heater, it has a dependence on the average anode input power. Therefore, a single line with a heating voltage is not a universal description of the power supply M1311L in all states.

The very meaning of this separation is important for the purchase: the magnetron works together with the transmitter and its modulator. Values from different lines of the datasheet cannot be arbitrarily combined into a new operating mode. This technical guide does not specify the connection sequence, the change of the heater or the setting of the equipment; compliance with the conditions is confirmed by the technical side of the documentation of the installed site.

Peak and average anode loads also differ. The sheet separately shows currents, input power and pulse duration. These values do not replace each other and do not describe the consumption of the entire marine post by one number. To agree on delivery, it is enough to accurately name the equipment and the required OEM position, without assigning a mode by short card.

Photo and quotation M1311L

Our catalog photo shows the product of the M1311L card, but the factory marking on the picture is not readable. Therefore, the image is not presented as a visual confirmation of the type or today's warehouse specimen. Manufacturer, designation, condition and completeness of actual delivery are confirmed separately.

The issue of standard receiver protection is already discussed in [separate article on M1311L](/st/m1311l-zashchita-priemnogo-trakta-do-zakupki.html); this material does not repeat the selection of the limiter. The object here is the construction of the magnetron itself and its conditions of application.

The reference point of your own card - see the product card with a warehouse mark. The current price, balance, documents and term are confirmed by the quotation. Supplies are included in the agreed composition with a total cost, works - separately. Specify the radar and unit model, the number, city or port of receipt in Russia or Kazakhstan and the desired date.

M1311L in our catalogue

M1311LM1311L - X-band magnetron.

The current price is indicated in the product card. for the required set, the total price is indicated.

Request a quote

Primary source: New JRC M1311L, an archival factory sheet labeled 95-12 · Nisshinbo: M1475A, another output flange for comparison.

All technical guide RadarStation