M1555: S-band V9, WR284 waveguide and transmitter assembly
M1555 A specific magnetron of the marine radar transmission channel S-bandwhich Nisshinbo series Advanced Spectrum Controlled technology V9. In RadarStation It has a separate product card and a real photo with a marking. M1555. This technical guide is dedicated to the product itself: its place in the transmitter, design and what the customer orders with it.
Request a quote
S-band and specific transmission channel
The current manufacturer page for the M1555 shows a fixed range of 3040–3060 MHz and a peak power of 30 kW. This is an S-band model. Its designation cannot be transferred to the X-band magnetron from another radar station of the vessel, even if both products are marine navigation.
To supply the fleet, such a binding is useful even before the number is selected. If different radars are operating on the ship, the order "one magnetron for radar" does not specify the required position. For the M1555, the name of the station and the transmitting unit to which it is provided should be retained. The second radar number helps describe marine equipment, but does not replace that anchorage.
M1555 generates microwave energy from the transmitting channel. It does not replace the receiving path, antenna, display and signal processing. Therefore, the purchase of a component does not equal the delivery of a complete radar, and its datasheet characteristics alone do not promise a certain detection range at sea.
What does the V9 mean to order?
The manufacturer places M1555 spectrum-controlled V9. This characteristic is permissible to indicate for the documented model. M1555. It describes a component, not a ready-made approval of the entire installed radar or an upgrade of its transmission path.
For the buyer, this difference affects the formulation of the task. The planned supply of the existing station requires the delivery of the M1555. If the customer wants to change the characteristics of the equipment, such a decision must be separately agreed for the station as a whole. The sale of one part does not confirm the result of the change in the system and does not include technical re-equipment by default.
In quotation, it is useful to save both records: the factory model and the OEM position from the applicable equipment documentation. The name of the technology complements them, but does not replace them. So the supplier’s response remains with a specific product rather than a general desire to purchase a “more modern magnetron.”
Waveguide, leads and housing
The official description of the M1555 specifies the waveguide output WR284, wired power supply terminals, air or forced air cooling and a weight of 1.7 kg. This combination determines the design profile of the product. The microwave output and electrical connection represent different interfaces that are agreed upon with the transmitting unit.
The familiar designation WR284 is found in other S-band models. For example, our [technical guide M1302L](/st/m1302l-s-band-volnovod-wr284-peredatchik.html) deals with a component with such output and other published mass. A waveguide match helps define a part of the structure, but does not allow the replacement of one type by another. Geometry, electrical mode and applicability remain separate conditions.
The catalog photo of M1555 shows the base and wired conclusions; the plate reads JRC and M1555. It helps to recognize the described model. At the same time, the Nisshinbo factory page is a source of characteristics, and a snapshot of its own catalog does not confirm the manufacturer, the condition or completeness of today's shipment. This information is recorded on the actually proposed product.
Model datasheet and delivery conditions
On the manufacturer's page, the fill factor is 0.001 and the pulse duration is 1 μs. Such information relates to the impulse operation of the transmitter. They are considered technically in relation to equipment; in this article they do not serve as instructions for changing the settings of an existing station.
The issue of the minimum and type power of the M1555 has already been discussed in our [article on reading the factory datasheet] (/st/m1555-m1302a-m1302l-moshchnost-pasport.html). Here it is important to keep another border: the datasheet describes the model in the specified conditions, and the quotation determines the specific delivery. The price of the part does not automatically include checking the entire transmitter, work and necessary additional materials.
If the M1555 is handed over to a service organization, the order should be agreed with it in advance. The magnetron can be supplied separately or with the said accessories. For a complete agreed set, a total cost and a list of incoming items are required; service works are designated separately. Existing refrigeration or connection elements should not be considered as new items in the kit without an appropriate inventory.
Price of M1555 and obtaining equipment
In RadarStation’s own card, the price is indicated in the product card and the warehouse mark. Before placing an order, we confirm the current price, availability, specific configuration, condition, documents, warranty and transfer date. If the buyer needs a specific document or acceptance procedure, this should be reflected in the request so that the quotation meets his purchase.
Specify the radar model, the transmitting unit, the quantity and the recipient of the equipment. For delivery in Russia and Kazakhstan, you need a specific city, port or address and the desired date. When the part is in marine reserve and the part is transferred to the service immediately, it is better to divide it in the application: this way you can agree on the composition and transmission of the M1555 for each recipient without mixing the sets.
M1555 in our catalogue
The current price is indicated in the product card. for the required set, the total price is indicated.
Request a quotePrimary source: Nisshinbo: M1555, S-band Advanced Spectrum Controlled V9.