Home » Articles and guides M1623: S-band magnetron and load dependence

M1623: S-band magnetron and load-dependent heater settings

M1623 is a magnetron for an S-band marine radar transmitter assembly. The RadarStation catalogue refers to the product page and stock indication. Its manufacturer description has an important feature: heater voltage is linked to anode-load conditions. The brief description '30 kW, 6.3 V heater' therefore does not describe the component's full operating context. This guide considers M1623 functions, connections and what that qualification means for technical enquiries and supply.

Request a quote
M1623 - catalog photo
Own catalog photo of the M1623: visible metal body, model marking and wired terminals. The image does not confirm the condition, operation or results of the inspection of a particular supplied product.

Separate S-band component

The official Nisshinbo page for the M1623 lists a fixed frequency range of 3040–3060 MHz and a peak power output of 30 kW. The product refers to sources of microwave pulses inside the transmitter. For purchase, it is a specific part, not an antenna system, a complete scanner, or an entire radar with an operator’s workplace.

The S-band designation helps define the family by range, but does not replace the model. The transmitter is designed for a specific product and applicable modes. Therefore, the M1623 application retains the full designation and transmission unit information. Accessories, modulator and other nodes appear in the quotation only when the agreed need, and not because of belonging to the same radar station.

What does the 6.3 V line mean?

The heater-voltage row in the manufacturer's DS-M1623 sheet, revision 10E dated December 13, 2024, has several columns, rather than a single number. The value 6.3 V is typical. An accompanying note links the specification to anode input power. This is a significant part of the model datasheet.

The note distinguishes an initial measurement without anode load from operation with that load present. At higher average input power, the document provides for heater adjustment according to the manufacturer's relationship. The same number on a brief product page therefore establishes neither identical operating conditions for different transmitters nor a substitute for the complete applicable document.

For the buyer, the practical step is to give the exact designation to the specialist responsible for the installed transmitter assembly. That specialist compares component requirements with equipment documentation. Retain the applicability question in the commercial enquiry without turning a brief product description into heater-supply adjustment instructions. Buying a magnetron does not include that adjustment or testing.

Power output and test context

The 10E electrical-characteristics table separates minimum and typical values. Peak output power is 25 and 30 kW respectively. These are not two separate M1623 product versions; they are different columns for one designation. The manufacturer's note also specifies the measurement condition.

Therefore, quotation cannot be compared only by the highest number. It is important to understand which datasheet line is used and what is relevant to the model verification. Typical power does not set a guaranteed target detection range, and a minimum number does not mean that the seller offers another magnetron without a separate configuration confirmation.

The table of limit parameters in the same sheet is highlighted separately. The manufacturer warns that limit values are not necessarily permissible at the same time. They are not folded into a new operating mode and are not used instead of transmitter documentation. For the delivery of the result, the exact position with clear documents remains, and the technical coordination of the regime refers to the work of the responsible specialist.

Waveguide, leads and placement

For the M1623, the manufacturer specifies output WR284, wired electrical terminals, weight of 1.7 kg and air or forced air cooling. This information describes the design of the product. The coincidence of one waveguide designation with another model does not confirm all dimensions, electrical requirements and interchangeability in the stored node.

The mass refers to the component, not the packaging or the complete transmitter. The mention of cooling also does not mean that the fan is on. When fasteners, response elements or accessories are needed, they are agreed upon according to the actual design of the transmitter and included in the statement. This allows you to get a certain composition with a total cost instead of the assumptions from the photo.

Photograph and delivery documents

On his own catalogue picture reads the designation M1623; visible metal housing and wired terminals. The picture confirms the appearance of the model in the catalog. Date of manufacture, production, condition and results of verification of a specific proposed specimen are confirmed separately. The 10E edition date also refers to the document, not the age of the product.

If the customer is simultaneously stocking two different radars, this task is disclosed in a separate technical guide set M1623/M1636. Here, the subject of the purchase is the M1623 itself and the agreed composition of its delivery for a specific transmitting node.

Get quotation on M1623

The reference card - see the product card; current price, balance, manufacturer, condition and term confirmed in writing. Specify the radar model, the transmitting unit, the installed designation, the number and requirements for documents. For the necessary accessories, we agree on the total price of the composition. Diagnostics, installation, inspection of equipment and delivery to the city or port of Russia or Kazakhstan are calculated separately.

M1623 in our catalogue

M1623M1623 - S-band magnetron.

The current price is indicated in the product card. warehouse delivery is indicated. The current price, availability, condition, configuration, documents and term are confirmed by letter. Fastening, response parts, work and delivery are included only according to the agreed composition; its total cost is indicated.

Adjacent catalogue entry: M1636 A separate X-band, with no promise of a replacement for the M1623. Its own technical guide.

Request a quote

Primary source: Nisshinbo M1623 - official model page and design parameters · Nisshinbo DS-M1623 10E, 13.12.2024 - factory sheet, all three pages.

All technical guide RadarStation