Home » Articles and guides MAF1565N: magnetron for JRC JMA-3340

MAF1565N: magnetron for JRC JMA-3340

MAF1565N Magnetron for Marine Radar Transmitter X-range. In my own catalog. RadarStation It is represented by a separate position with the price in the product card. For the buyer of this model, it is useful to know not only the power: it has an exact factory specification and a specific binding to the scanner. JRC NKE-2103 series documentation JMA-3300.

Request a quote
MAF1565N - photo of our catalog card
MAF1565N: A real photo of our catalog card. The actual marking, condition of the specimen, documents and scope of supply are confirmed by quotation.

10 kW model in Nisshinbo lineup

The MAF1565N is part of the Advanced Spectrum Controlled (V9) family. The current Nisshinbo page lists a fixed range of 9380–9440 MHz and a peak output of 10 kW. Here we are talking about a component that creates microwave pulses inside the transmitting node. This is not a finished antenna, not a modulator, not the entire radar station.

The MAF1565N should be searched for in full designation. There are other magnetrons in the same manufacturer’s lineup, and the generic name X-band alone does not define the purchase. Even belonging to a V9 does not mean that two parts have the same configuration or are allowed for the same transmitter. The series characterizes the manufacturer’s technological group; the applicability of a particular model is established by the equipment.

The MAF1565N has a WR90 waveguide, a flange equivalent to UG-135/U, and wired electrical terminals. The manufacturer shall indicate a mass of 0.4 kg and air or forced air cooling. This data is useful when compared with the existing node, but does not replace its drawing. The similar compact design of another product does not automatically make it suitable.

Precision binding example: JRC JMA-3340

In the JMA-3300 Field Service Manual, table 3.1-11 refers to NKE-2103 for variants JMA-3340-4, -4HS, -6 and -6HS. In it, the magnetron MAF1565N is named V101, with the code 5VHAA00102 and the manufacturer NJRC. It is this bundle that helps move from the radar name to a specific part for supply.

All levels of recording are important. JMA-3340 stands for equipment, NKE-2103 stands for the corresponding family of scanners, V101 stands for position inside the sheet, and MAF1565N stands for magnetron type. The code 5VHAA00102 is shown here from this particular table. It should not be rewrote to universal compatibility for any JRC station or any equipment with the same power.

In section 2.1.1 of the same manual, variants of the JMA-3340 are separated by antenna and rotation speed. These are different configurations of the marine kit, although the spare parts table combines them according to the magnetron position in question. When requesting, save the full model suffix: the service organization also needs it for other parts and works.

Guidance optionsAntenna and rotationWhat is saved in the request
JMA-3340-4 / -4HS4 feet; 27/48 rpmFull radar and actual scanner
JMA-3340-6 / -6HS6 feet; 27/48 rpmFull radar and actual scanner

Why a single display is not enough

The JMA-3300 series includes several variants of scanners and transmitters. Therefore, a photo of a screen with a common family name does not always provide sufficient initial data for the order. In the same guide, other magnetrons for other scanners are listed next to each other: you cannot transfer the MAF1565N string to the entire family.

It is more useful to transfer the model of the station along with the designation of the scanner and the installed magnetron. If the marine kit has previously been modified, the actual configuration details are particularly important. This is not a requirement to independently open the transmitting unit: the marking and service sheet are requested from the service organization. It also determines whether the magnetron is actually required or whether the reason is in another node.

Ship repair component or stock

Repair and replenishment orders may contain the same type of MAF1565N, but different quotation composition. For repair service predetermines the necessary accessories and scope of work. For the stock, it is important to agree on a certain product, its documents and the method of transfer to the ship. In both cases, the name of the part should remain unambiguous.

A photo of our directory shows the overall look of the component and outputs. It does not confirm the current batch, the age of the specimen or the composition of the package. The quotation separately fixes the manufacturer, the actual marking, condition, available documents and warranty conditions. Documents for the entire radar or its compliance with the requirements cannot be derived only from the name of the technological series of the magnetron.

This list price refers to one component. If you need supplies, service or delivery, request a complete agreed lineup with total cost; works are listed separately. We confirm the remainder and term before ordering. Write down the city and the point of transfer – for example, Murmansk, St. Petersburg, Vladivostok or the port of Kazakhstan – so that the quotation takes into account the actual supply route of the ship.

MAF1565N in our catalogue

MAF1565NMAF1565N - X-band magnetron.

The current price is indicated in the product card. for the required set, the total price is indicated.

Request a quote

Primary source: Nisshinbo: MAF1565N, description and specification · JRC JMA-3300 Field Service Manual: Sections 2.1.1 and 3.1, Table 3.1-11.

All technical guide RadarStation