MAF1615B: what the purchase includes
The MAF1615B is not designed to make any marine radar more powerful. This is a specific pulsed X-band magnetron for a transmitter whose documentation provides just such a component. When buying, it is important to get an agreed position for existing equipment and understand what will be required beyond the lamp itself for the completed service delivery.
Request a quote
What is MAF1615B?
Nisshinbo classifies MAF1615B as an Advanced Spectrum Controlled (V9 Technology) magnetron. On the manufacturer's page, the peak output power is 12 kW. This is a characteristic of the momentum being generated, not the consumption from the marine network, nor the promise of a certain range of detection.
Therefore, the query "need a magnetron at 12 kW" is too wide. For a specific purchase, the starting point is the full MAF1615B marking and the confirmed binding to the transmitting unit. The performance of the entire radar also depends on the rest of the nodes and their condition; the purchase of one part does not replace the evaluation of equipment by the service.
The manufacturer's range is 9380-9440 MHz, the frequency is designated as fixed. This record is used when comparing component and system documentation. It should not be understood as a quotation for the crew to rearrange the magnetron at the specified interval. The required configuration and applicability to the transmitter must be determined prior to delivery.
What are the boundaries of this purchase?
Let’s say that the service has already confirmed the need for a MAF1615B transmitter. The shipowner now needs two clear results: to get the agreed magnetron and know in advance what additional positions or works are included in his quotation. These issues are convenient to solve together without mixing the cost of the part with the price of the finished service.
The magnetron itself is not a transmitter assembled. Purchasing the MAF1615B does not mean getting a modulator, antenna node, new display or a radar upgrade kit. If the service needs accessories or other parts, they are called separately in the general composition. In the absence of such a need, existing suitable parts do not need to be automatically replaced for a complete new set.
This is especially important when comparing two quotations. One can only apply to the lamp, the other can include additional positions and an agreed scope of work. The difference cannot be estimated by the price of the MAF1615B line alone: first, we need to see the same lines of delivery. Then it becomes clear which order actually closes the stated task.
Body and interface matter
The manufacturer specifies a waveguide WR90, a flange equivalent to UG-135/U, and wired-type electrical terminals. This information helps to compare the product with the documentation of the existing site. Our catalogue image shows the MAF1615B itself; you can read the type and see the overall look of the component.
One similar shape of the housing or a matching waveguide is not an independent confirmation of interchangeability. When agreeing, the configuration, connecting dimensions and requirements of the transmitting unit as a whole are taken into account. Installation or high-voltage operations are not described here: information about the interface is needed by the buyer for an accurate order, and not for self-equipment.
The specification also includes air or forced air cooling. This is another part of aligning existing equipment, not a reason to promise to work in any enclosed enclosure. Applicable conditions shall be determined by the documentation of the transmitter and the proposed product. It is not enough to specify in the order only the name of the cooling instead of the block model.
How to formulate a completed request
A good starting point is: “MAF1615B is needed for the transmitter; please confirm the exact position to be delivered and give the total price of the agreed composition.” To it add the radar model, the designation of the transmitting unit, information about the installed lamp and the desired amount. If the service has already prepared a conclusion or a list of necessary parts, it is useful to attach it to the request.
The catalogue image shows the type of product, but not the state of today's warehouse specimen. Therefore, before the order separately confirm the actual marking, manufacturer, condition and composition of the proposed delivery. Document requirements are specified by their purpose; the name of the V9 series is not a certificate of the entire radar system.
It is not necessary to fill in unknown technical fields with guesswork. It is better to write directly what data about the transmitter is not yet available and who on the part of the customer agrees on the applicability. This allows you to specify the position before shipment and get a quotation for a certain product instead of the vague promise “any analogue will do”.
Component price and total quotation
The MAF1615B card now contains a price per magnetron. This is the reference point of the catalog: the actual balance, a specific copy, documents, the final price and the term are confirmed before the order. The amount does not indicate the cost of a complete repair or the entire transmitting unit.
Additional accessories, agreed service staff and work are considered in a general quotation with a clear separation of positions. Specify the city of receipt – for example, St. Petersburg, Murmansk, Astrakhan or Vladivostok – and the date required. So the answer will have to do with the actual task of supplying your ship, not just the name of the lamp.
MAF1615B in our catalogue
MAF1615B - Magnetron Marine Radar.
The current price is indicated in the product card. work separately. The price of the component is not the price of the finished repair.
Request a quotePrimary sources: Nisshinbo: MAF1615B, description and specification. Applicability to a particular transmitter and the required composition are agreed before ordering.