Home » Articles and guides MG4006: compact magnetron 6 kW and heat tract

MG4006: a compact 6 kW magnetron and its thermal path

The MG4006 is an e2v compact magnetron for an X-band pulse transmitter with a typical peak power of 6 kW. His own card in RadarStation is suitable for requesting a separate spare part. But this model has other important features: an integrated magnet, a specific output node, and a combination of heat removal through the base with natural cooling. Consider the MG4006 as a specific product, not just a row of the replacement table.

Request a quote
MG4006 - photo of our catalog card
MG4006: Photo of its own catalogue marked e2v EEV MG4006. The status and composition of the actual delivery are confirmed separately.

Fixed frequency and impulse work

The factory document A1A-MG4006 Version 11 describes the model as a magnetron of fixed frequency 9410 ± 30 MHz. This is a component of the X-band marine radar transmission channel. Its task is to form microwave pulses; the reception of reflected signals and image construction are provided by other stations.

The word "fixed" here helps to correctly define the subject of purchase. The MG4006 should not be presented as a universal convertible generator that can be arbitrarily replaced with any microwave source of the same power. Applicability is determined by the transmitter device. The quotation requires the full type of product and equipment for which it is agreed.

Typical 6 kW refers to peak power output, not continuous radiation or the consumption of the entire radar. Therefore, the price and purpose of the MG4006 is not compared with another model only on the rule of “more kW is better”. Recovery of an existing station requires an envisioned component, not an increase in the number in the catalog.

Built-in magnet and compact case

The MG4006 magnet is included in the design. There is no reason to add a separate magnetic system to each application as a mandatory second product. If the service organization orders other parts of the transmitter, they must be self-named and not implied in the word magnetron.

The specification gives an approximate mass of 250 g. This is the mass of the component itself: a parcel with protective packaging, accessories and documents will be another object of delivery. Compactness is useful in the preparation of marine ZIP, but does not confirm the ability to place the part in any free place of the unit. Sizes and attachments refer to a specific equipment design.

The catalogue's own photo shows the e2v EEV MG4006 marking and wired leads. The image shows the appearance of the model, not the confirmed state of today's warehouse specimen. For quotation, the manufacturer, marking, completeness and required documents for the actually shipped product are separately agreed.

The heat sink is part of the transmitter design

For the MG4006, the manufacturer specifies two related cooling methods: thermal conductivity and natural cooling. This means that when evaluating applications, the heat path through the structure is important, not just the air around the housing. The information relates to the operation of the component in the equipment and is not a permit to remove ventilation from an existing radar.

For the buyer, the practical conclusion is as follows: the magnetron and the finished cooled transmitting unit are different boundaries of the order. When a separate MG4006 is delivered, the station body, heat removal elements and their condition remain part of the serviced equipment. If the service offers a node assembly, you need to see its own designation and composition, and not consider it equal to one magnetron.

This question is especially relevant when comparing two repair quotations. One may include only a component, the other may include restoring the transmitting unit and checking the equipment. The difference in cost does not show where the quotation is more profitable: first, you should compare what the buyer receives and what works the service performs.

Output Node and Gen4 Boundaries

The factory sheet indicates output No. 16 waveguide and IEC UBR/PBR/CBR 100 connection. When agreed with the service, these designations are useful to keep together with the MG4006. They describe the interface, but do not automatically confirm all landing dimensions and compliance with any installed unit.

Comparisons of old types with Gen4 And the terms of the transition plates are already discussed in our [separate table]. MG4004, MG4006 and MG4010](/st/tablica-gen4-mg4004-mg4006-mg4010-plastiny-a-b.html). The plate from the row of such a table does not become an affiliation of each sale. MG4006. If it is needed in a specific agreed set, its designation and availability must be specified in the quotation.

For the model available factory sheet version 11, released in 2016. Its working examples, test conditions and limit parameters have different meanings. The document helps the technical party to evaluate the product; it does not specify the year of release of the proposed part and does not replace the documents for a specific delivery. Transmitter configuration refers to the work of the profile performer.

MG4006 in catalog and delivery

In your own card, the price is indicated in the product card and the warehouse mark. Before ordering, we confirm the current price, actual availability, condition, manufacturer, warranty and term. If accessories are needed along with the component, we agree on the full composition with the total price; repair and inspection works are designated separately.

In the application, specify the number, model of the radar and transmitting unit, the type specified, the city or port of receipt and the desired date. Delivery in the regions of Russia and Kazakhstan is coordinated at a specific point of transfer. For a marine order, it is useful to immediately name who accepts the part: the owner, supplier or service organization, so that the agreed documents and composition reach the responsible contractor.

MG4006 in our catalogue

MG4006MG4006 - Magnetron X-band.

The current price is indicated in the product card. for the required set, the total price is indicated.

Request a quote

Primary source: e2v A1A-MG4006 Version 11 (2016): factory specification, PDF copy.

All technical guide RadarStation