Home » Articles and guides MG4010: pulse mode, medium load and design

MG4010: pulse operation, average loading and construction

MG4010 is a compact pulsed e2v magnetron for the X-band transmission channel. In the A1A-MG4010 Version 10 factory sheet, it is described as a component with a typical peak power of 12.5 kW, a built-in magnet and a mass of about 250 g. Consider its working architecture by this specification: what the pulses mean, how they relate to the transmitter, and what product is presented in our photo.

Request a quote
MG4010 - photo of our catalog card
e2v EEV MG4010 in a photo of its own catalog. The image does not confirm the separate configuration of FNE1201 or the status of current delivery.

MG4010 as a source of microwave pulses

The manufacturer specifies a fixed frequency of 9410 ± 30 MHz. The MG4010 generates transmission channel pulses; it is not a separate radar station or a complete generator with universal external power supply. Its work is provided as part of a certain transmitting unit.

The concept of fixed frequency is important for the description of the product. It does not mean that there is a custom rearrangement throughout the X-band. The frequency window, pulse mode and modulator requirements are considered together. If a different type is required for the equipment, the proximity of the short catalog specifications does not make the MG4010 an agreed replacement.

We have already covered the communication with specific Furuno transmitters and the difference in power designations in the reference books in [separate technical guide MG4010 and RTR-078](/st/mg4010-10-12-kw-furuno-rtr078-tochnyi-tip.html). Here the basis is the factory description of the component itself. Its values cannot be automatically transferred to any station with similar power.

Typical pulse mode in the factory sheet

In the section Typical Operation version 10 given the duration of the pulse 1 μx and frequency of repetition 1000 pulses per second. For this specified mode, the typical peak output power is 12,5 kW and the average power output is 12,5 W. These are two indicators of one impulse work, not two different classes. MG4010.

For the buyer, this example is useful when reading the quotation or specification. A high power short pulse does not mean continuous radiation at the same level. The average output value does not describe the entire power consumption of the transmitting unit. The magnetron datasheet and power supply marine station characteristics answer different questions.

The above example is not a task for configuring an existing radar. The standard mode, test conditions and limit parameters are highlighted separately in the document. The technical contractor uses them with the documentation of the equipment; from one section it is impossible to make an arbitrary combination of parameters and declare it an acceptable work of the transmitter.

Average load: entry and exit differ

The MG4010 absolute limits table shows the maximum average input power of 70 W. This is a different parameter than the average microwave power output. Therefore, the number 70 W does not replace the 12.5 W of the typical example and does not become a ready-made characteristic of the power supply of the entire radar.

This separation helps to maintain the meaning of the data when matching the component with the service. In one case, the energy transmitted to the magnetron is discussed, in the other - the microwave energy of the output signal. To compare quotation it is necessary on the same terms and conditions, without reducing them to one word "power".

For the MG4010, this is essential precisely as for a pulsed product: the value on the nameplate of the transmitting unit, the peak output of the magnetron and the average load can describe different levels of the system. They do not identify each other without proper documentation. This material does not calculate modes and does not suggest changing them according to the number found in the catalog.

Construction and accession

The MG4010's magnet is embedded. The specification specifies output No. 16 waveguide with IEC UBR/PBR/CBR 100; cooling is described as thermal conductivity and natural cooling. This information characterizes a compact component that transfers microwave energy to the intended path and works together with the design of the transmitter.

The approximate weight of 250 g refers to the product itself. It does not include all block accessories or transport packaging. The presence of a built-in magnet also does not mean that a complete transmitter, fastener and connector elements are included in each delivery of an individual MG4010.

Outline factory section allows you to compare the design with the documentation of the site, but the drawing itself is marked as not intended for inspection control. This is an important boundary of the document: review dimensions do not replace the agreed conditions for the acceptance of the product. Transition plates and Gen4 mappings are discussed in [our separate table](/st/tablica-gen4-mg4004-mg4006-mg4010-plastiny-a-b.html); its lines are not repeated here.

What position is offered in the catalog

The image reads e2v EEV MG4010. Our product card is grouped as MG4010 (FNE1201), but the factory specification used here is for MG4010. Combination in the directory does not prove the OEM identity of the two designations and does not confirm a separate residue of each. The buttons for this technical guide are the MG4010.

The reference card - see the product card with a warehouse mark. The exact copy, manufacturer, condition, documents, current price and term are confirmed by quotation. Accessories are agreed in a general composition with one price, service works - separately. Specify the model of the radar and the unit, the number, city or port of receipt in Russia or Kazakhstan and the desired date.

MG4010 in our catalogue

MG4010MG4010 - Magnetron X-band.

The actual price is indicated in the product card. the identity of the designations and a separate balance of each configuration are not assumed. Availability, manufacturer, condition, data on the lot, documents, warranty and term are confirmed by quotation. Supplies and works are included only according to an agreed inventory; the total price is indicated for the required set.

Request a quote

Primary source: e2v A1A-MG4010 Version 10 (2016), factory specification: PDF copy.

All technical guide RadarStation