MG5223: S-band construction
The MG5223 is a pulsed magnetron of the marine S-band transmission channel. For the buyer, this is a specific microwave component with its own magnet, waveguide output and conditions of use in the transmitter. RadarStation has a separate MG5223 card with its catalog photo. Below we consider the design of this model according to the archival specification of the manufacturer, maintaining the full designation without adding suffixes.
Request a quote
S-band and transmitting part of radar
In the leaf Marconi Applied Technologies A1A-MG5223 Issue 2 December 2001 The fixed operating range is specified 3050 ± 10 MHz and typical peak power 30 kW. It's a description. MG5223 for S-bandIt is not a universal designation for any magnetron with close power. Frequency refers to a component model; applicability to a particular station is determined by the documentation of its transmitting unit.
Peak power characterizes impulse work. It cannot be understood as a continuous output power or a promise of a specific detection range. For the purchase, it is important to keep the purpose: the customer receives the component of the existing radar, and the receiving part, antenna, processing and display remain other nodes of the system. Replacing one part is not a new radar.
The practical task may be to restore the provided transmission channel after the conclusion of the service organization. In this case, the exact designation of the installed MG5223 is associated with the block model. If a change in the system itself is considered, it cannot be formalized as a normal sale of a similar part: the technical result must be agreed for the entire equipment.
Integral magnet and waveguide output
The archive specification specifies an integral magnet, output no. 10 waveguide and interfacing with coupler NATO S.N. 5985-99-083-0058. These are specific design features of the MG5223. The output of the microwave is described here as a waveguide connection, so it cannot be represented by a conventional cable connector or considered any S-band connector.
For the buyer, such a record helps to separate the magnetron itself from the surrounding parts of the transmitter. The installed mate element, its condition and the possible need for a separate accessory belong to the composition of the repair. The mention of a coupler in a datasheet does not mean that it is included in every shipment of a magnetron. If you need it in a new set, this should be directly reflected in the quotation.
The integrated magnet also does not make MG5223 a complete transmitter. It refers to the design of the microwave device itself. power supply, pulse formation, coordinated path and heat removal are provided by the provided radar nodes. Therefore, the supply of a separate component and the quotation of the node in the collection are compared as different items of purchase, with an understandable total cost of each composition.
Housing and conditions for heat removal
The same sheet contains an estimated mass of 2.1 kg and natural or forced air cooling. The limit temperature of the anode is specified separately and is 120 ° C. This is a condition of use of the product, not a temperature to be assigned as a working purpose. The on fan or ready-made cooling kit from these lines do not follow.
When agreeing on delivery, the service needs information about the existing transmitting unit and retained parts. It is useful for the buyer to understand in advance whether only a magnetron or an agreed set with the named accessories is purchased. You can not promise that a larger housing or forced blowing of another product will automatically fit instead of the intended configuration. Geometry and applicability are determined by documentation, not by the size of the image in the catalog.
datasheet sets conditions, quotation - delivery
The MG5223 specifies absolute limits, standard modes and test conditions. The manufacturer expressly states that limit values are not necessarily permissible at the same time. Therefore, it is impossible to collect individual maxima in an arbitrary transmitter mode. For technical approval, the applicable equipment documentation is used; high-voltage unit settings or test procedure are not given here.
The archived date of the source is also significant. The sheet describes the documented model and terms of this edition. It does not, by itself, confirm the current manufacture, date of release or condition of a particular product from the warehouse. This information relates to the item actually proposed and the documents transmitted. Catalog photo helps to know the design, but does not replace the confirmation of the marking and history of the specimen.
The catalogue exists separately. MG5223F. We've already looked into his connection to OEM-Position and issues of development in [technical guide] MG5223F](/st/magnetron-mg5223f-oem-nomer-narabotka-zamena.html). This material does not carry the information F on MG5223 and does not declare the designations interchangeable. At delivery, the exact agreed type is maintained.
MG5223 price and agreed kit
Your own card contains a price and a warehouse mark. This is a reference point for a separate component; the current price, balance, manufacturer, condition, documents and term are confirmed by quotation. If you need matching parts or other accessories, list them in the general inventory and indicate the total cost of the kit. Service work is agreed separately.
To request enough accurate radar model and transmitter, installed type, quantity and delivery requirements. Add the city or port of receipt and the desired date. Delivery in Russia and Kazakhstan is agreed for a specific recipient; a single term for all destinations from the presence of the card does not follow.
MG5223 in our catalogue
The current price is indicated in the product card. for the required set, the total price is indicated.
Request a quotePrimary source: Marconi Applied Technologies: MG5223, A1A-MG5223 Issue 2, December 2001 – archival specification of the manufacturer.