Home » Articles and guides MG5436: IEC UBR100 output, natural cooling and power parameters

MG5436: IEC UBR100 output, natural cooling and power ratings

The MG5436 is being purchased as a specific transmitting component of the marine radar. The question of whether a magnetron will fit at 25 kW is too general here: it leaves out the connection to the waveguide, thermal conditions and the meaning of datasheet numbers. The MG5436 has its own design description. It is useful for the technical specification of the purchase even before the price and timing are discussed, even when the exact designation of the installed product is already known.

Request a quote
MG5436 - catalog photo
Catalog photo MG5436 from our website: the appearance of the component. The marking, condition and set of a specific delivery are confirmed separately.

What component describes the factory sheet

Archival sheet e2v MG5436, Issue 7, June 2016, refers to a fixed-frequency pulse magnetron for marine radar. For the model, the operating frequency is 9410 ± 30 MHz and a typical peak output power of 25 kW. This is a description of the X-band component, not a separate radar with an antenna, receiver and display.

The quotation on MG5436 refers to the part of the transmitting node; it does not in itself include the restoration of the entire station. If the equipment continues to perform poorly after the previous replacement, we have a separate technical guide for this case. Here we consider the device of the model itself and the information that helps determine the subject of delivery.

Output no.16 and IEC UBR100 connection

The mechanical data indicate the output waveguide no.16 with an internal cross section of 22.86 × 10.16 mm and the connection IEC UBR100. For the buyer, these are two specific features that should be transferred to the technical part of the request. Simply writing “X-band, 25 kW” means losing the connection between the component and the existing transmitter.

Matching a separate size with another model does not confirm a replacement. The delivery must be MG5436 or a separately agreed position with the basis of applicability. The presence of a transition part, a response connection or fastener in the price of the magnetron is not expected. If such accessories are required according to the documentation of your station, they are included in the quotation in separate lines.

Built-in magnet and thermal architecture

The sheet describes the built-in magnetic system, a mass of about 0.7 kg and natural cooling. This is a design characteristic of the MG5436. It can not be extended to the promise of operation at any temperature inside the scanner or to the permission to exclude the standard cooling elements of the radar station. The capabilities of a particular transmitter are determined by its configuration and applicable documentation.

In order to negotiate a purchase, it is useful to separate the component itself and the environment in which it operates. Requirements for placement, heat removal and neighboring parts are checked by the service according to the documents of the site. The buyer does not need to change the design himself: he needs to understand that the agreed quotation refers to a suitable configuration, and not to any housing with similar dimensions.

Three power numbers answer different questions

The Typical Operation section of Issue 7 specifies 25 kW peak and 18 W average output power. Limiting data separately gives 100 W average input power. Input power must not be recorded as output, nor typical output values as universal limits for every mode. These rows describe different aspects of one device.

When comparing quotation, it is important that the supplier and the customer refer to the same value. Write “100 W power” without explanation can create a completely different view of the component. datasheet conditions are used to compare documentation, not as a task to set the parameters of the transmitter. Delivery of the part is also not a promise to obtain a certain range of detection of the entire radar.

What the photo shows and what relates to the delivery

Our catalog photo shows the appearance of the e2v component with conclusions. This is an image of the model in the catalog, not a confirmation of the status or readable marking of a particular shipped instance. For quotation, the manufacturer, designation, condition and documents for actual delivery are separately indicated. The image does not confirm the inclusion of accessories that are absent or indistinguishable on it.

The Issue 7 date is needed to accurately refer to the used factory sheet. It is not the date of release of the proposed product and does not confirm its modern certification. If certain documents are required for the purchase, this requirement is indicated directly. Information about a particular instance is considered separately from the general characteristics of the type.

Price and agreed order composition

In its own MG5436 card, the price is indicated in the product card and a mark of availability with shipment from the warehouse. The current price, balance, condition and term are confirmed by letter. When ordering, specify the model of the radar and the transmitting unit, the installed designation, the quantity, the requirements for documents and the place of delivery. Service work, accessories and delivery are agreed separately from the price of the component; the total cost is requested for the selected composition.

MG5436 in our catalogue

MG5436MG5436 - Magnetron X-band.

The current price is indicated in the product card. warehouse delivery is indicated. The current price, availability, condition, configuration, documents and term are confirmed by letter. Fastening, response parts, work and delivery are included only according to the agreed composition; its total cost is indicated.

Request a quote

Primary source: e2v MG5436, Issue 7, June 2016 - archival copy of the factory sheet.

All technical guide RadarStation