MSF1425B: pulse magnetron and modulator matching
MSF1425B is purchased as a specific component of a marine radar transmitter. It must match both the frequency band and transmitter operating conditions. Its technical sheet contains an important note on transient impedance and anode-pulse shape. Procurement discussions should therefore supply the exact document to the service organisation rather than stop at 'a magnetron of about 10 kW'.
Request a quote
Independent detail inside the transmitting node
Technical Information sheet MSF1425B, Rev.2, describes an X-band magnetron with a fixed frequency range of 9380–9440 MHz and a peak output power of 10.5 kW. This value characterizes the pulsed microwave output. It does not indicate constant electricity consumption and is not the power of a ready-made radar station in all conditions.
For supply, this follows a simple lineup boundary: the quotation on MSF1425B refers to the component itself. The modulator, other parts of the transmitting node, and the radar repair work are not automatically included in the price of the parts. If the application relates to a comprehensive service delivery, list the required positions and works, maintaining the exact designation of the magnetron.
The catalog photo on our website shows a metal case with the MSF1425B label and two wired pins. It helps to see the design of the model, but does not confirm the state of the shipped instance, its origin or the result of the test. This information is considered on the actual delivery; the image does not replace the documents with a specific product.
The modulator determines the conditions of the input pulse
The magnetron is considered at the same time a transmitting node where it should work. When preparing a request, it is important to name the complete model of this node, the configuration of the radar and the designation of the part according to its documentation. The same power line for two products does not yet describe the conditions of their interaction with the existing circuit.
For example, a ship orders MSF1425B for a stored transmitter, and the service organization decides on the work. The supply can correctly specify the component model and get the correct quotation. However, the technical issue of applicability remains with the transmitter documentation and the person in charge. Purchase of a spare part and confirmation of the completed result of repair are different parts of the same application.
What Note 3 in Rev.2 Says
In the note, the manufacturer separately indicates the inadmissibility of the release of anode current. He also distinguishes between ordinary and transitional impedance: the coincidence of impedance with the former magnetron does not automatically extend to the transitional component. For installation in the modulator circuit, similar to the one used earlier, the sheet associates the matching of the shape of the anode current with additional reactivity.
For the buyer, this raises a specific technical question: how does the selected MSF1425B match the retained modulator under applicable documentation? This guide provides no component values, high-voltage intervention sequence or self-adjustment procedure. A qualified service organisation determines the required solution for the installed equipment.
In the request, it is convenient to divide the two positions of the solution. The first is the exact delivery item, MSF1425B. The second is the composition of the service work and the required confirmation of the result for the existing transmitter. So the quotation shows what relates to the price of the part, and what requires separate coordination of works.
datasheet numbers retain their purpose
The limit and electrical characteristics are presented separately in Rev.2 and the test conditions are noted. Therefore, values from different lines cannot be collected in an arbitrary operating mode. Peak power output is also not a guarantee of a certain range of detection of the entire radar after the replacement of the component.
A useful result for the purchase is one agreed reference to the model and the edition of the document. If the service uses another document, enter its name in the request. Then the issue of discrepancy is considered before shipment, not after receiving the part. For this purpose, it is not necessary to include in the commercial letter independent calculations of transmitter modes.
Keep the full MSF1425B designation
There's a catalog next door. MSF1425BK. Letter K You can not silently discard, and the option itself cannot be included in the order under the abbreviated general name. This technical guide and used Rev.2 relate MSF1425B. The delivery of a different designation requires a separate basis and agreement; a similar corpus or number from the directory of such a solution is not a substitute.
The same applies to the quotation of another family. If the supplier's response changed the designation, keep the original requirement and the proposed option separately. The issue of applicability is decided on the exact documentation, not just the name of the manufacturer or the external similarity of the photos.
Price and composition of quotation
In our own MSF1425B card, the price is indicated in the product card and warehouse delivery. The New JRC record refers to the manufacturer's designation; the status of the selected instance, the actual balance, documents and deadline shall be confirmed in writing. To request, name the radar transmitting the node, the number, accessories required, the service organization and the port or city of receipt. We agree on the total cost of the selected composition. Installation, transmission check and delivery are calculated separately from the magnetron price.
MSF1425B in our catalogue
The current price is indicated in the product card. the current warehouse supply is confirmed by letter. The current price, availability, condition, configuration, documents and term are confirmed by letter. Fastening, response parts, work and delivery are included only according to the agreed composition; its total cost is indicated.
Request a quotePrimary source: MSF1425B, Technical Information Rev.2 - the exact factory sheet from our catalogue.