SAILOR 6080 and TT-6080A / 406080A: power, backup and the difference from 6081

In the warehouse catalog, the position 6080 has the short name "Charging", but the manufacturer's management calls the SAILOR 6080 Power Supply - power supply unit. Before ordering, it is important to separate a separate AC/DC module, battery backup, and the system that should charge the battery. A single card name does not define all of these functions.

Request a quote

Schematic illustration of a node type is not a photograph of a sold instance
Schematic illustration from the RadarStation catalog. Please request photos of the actual copy or package before ordering.

What is described in manual 6080

SAILOR 6080 converts network power supply to permanent and provides switching to an external battery when AC fails. Switching the source and battery charge are different tasks. The presence of a battery input does not in itself confirm that the individual unit purchased will complete the required charge cycle.

The manual provides 300 W of continuous power and a short-term peak of 370 W under specified power supply and load conditions. The peak number cannot be used as continuous power to calculate permanently connected equipment. Installation capabilities also depend on cooling and accommodation conditions.

Why is the number 6081 nearby?

For the SAILOR 6081, the manufacturer uses the designation Power Supply Unit and Charger. In its documentation, modules 6080 are treated as part of a power supply system, and the battery charge is described as a function 6081. Therefore, in the request for the restoration of such a system, it is necessary to name not only the removable module, but also the saved kit.

If you only need to replace 6080 in the existing installation 6081, attach data from both parts. If you need a new power supply system with charge and reserve, ask for quotation for the entire agreed lineup. Buying one module cannot automatically be equated with buying a complete system.

If the batteries and the charger are in different places

If the batteries are in a separate compartment, describe this compartment together with the place of installation of the charging unit: the type and designation of the battery, operating conditions and the actual distance between the units. This information is needed to agree on the complete set, not just the length of the next cable. The temperature of the air near the power supply unit cannot be mistaken for data about the battery.

SAILOR 6081 98-130980-A provides a battery temperature sensor to adjust the charging profile. Temperature compensation and temperature warnings are associated with the presence of a sensor. The selection requires documentation of the specific battery and the confirmed applicability of the standard sensor to the system configuration; an arbitrary NTC is not considered a ready-made replacement.

Separately agree on what information the operator should receive. The manual distinguishes between monitoring data and relay alarms: a temperature message should not automatically be considered the same signal as a voltage control relay. Specify the retained terminal or surveillance system and the desired display result.

Ask for quotation for the entire agreed composition: a suitable sensor with a line, necessary accessories and separately agreed work. The length of 3 m in the catalog designation does not allow arbitrary elongation. The composition, applicability, total price and verification procedure are confirmed before delivery; installation and settings are performed by a specialist in the documentation of the installation.

What information determines the choice

  • Photo of the nameplate of the removed block and full part number.
  • A separate source or module of the installed system 6081.
  • List of loads and their long and short-term consumption.
  • What battery and charger are already installed.
  • Existing redundancy and alarms are required.

If part of the data is unknown, pass the diagram of the existing system to the service for reconciliation. Do not select the number of modules by simply multiplying peak power: the configuration, load distribution and battery part must match the installation documentation.

How to compare two warehouse records

There's also a catalog. TT-6080A with article 406080A. For quotation comparison, ask for actual instance markings, scope of supply, and verification results. The difference in the short names and price status of the cards does not confirm either the difference in equipment or its identity.

For a former unit in operation, coordinate the check of the required outputs, the backup mode in the installation and the necessary signals. Battery, charging system, installation parts and works are included in the quotation only on the list. This query allows you to compare the cost of restoring a particular power supply function.

Card and documents

Supply and coordination

A warehouse card with the short name “Charging 6080” shows Used · 1 and the price see the product card. Separately, the catalogue has TT-6080A/406080A on request. These are different catalog entries; matching the actual configuration and composition is confirmed by markings and photos.

Price and term - by quotation for the agreed composition. Specify the port or city, the required date, documents and method of acceptance. A mark in the catalog helps to select a position for the request; the actual balance and reserve are confirmed before the order.

Request a quote

Select a different theme for the technical guide