SAILOR 67-135974 Pilot Plug: pilot connection for AIS 6282

SAILOR 67-135974 - Pilot Plug for connecting pilot equipment to AIS. In the SAILOR 6280/6281 factory list, this article is separated from the transponder 6282, the control panel 6004 and the connection box 6283. If you need a damaged or missing connector, the application should specify 67-135974.

Request a quote

Pilot Plug SAILOR 67-135974 between AIS 6282 interface and pilot equipment
Scheme for the purpose of the pilot connector, not the mounting scheme and not a photograph of the proposed instance.

What is Pilot Plug in the System?

Installation manual 98-137573-B describes the pilot connector in the section 4.3.4. It provides access to SAILOR 6282 standard Pilot Plug connectorThe manufacturer provides for its placement where the pilot is convenient to connect. The circuit of this section connects the connector to the interface PI2.

For a restored marine post, it is important to agree on the entire connection path: the transponder installed, the appropriate interface, the cable and the available connector. The presence of one new item in the warehouse does not confirm the condition of the rest of the line. If the malfunction occurs only when external equipment is connected, describe the conditions for its occurrence in the request.

Connector, contacts and cover

Table 4-5 of the manual lists parts of the connector kit: AMP/Tyco 206486-2 connector with a square flange, contacts 66570-3 soldered and a protective cover 208800-1. This helps to make an inventory of the required accessories. All of these parts should not be considered included in a specific quotation until the supplier has confirmed that entry 67-135974 is actually complete.

Ask for a photo of the connector itself on both sides and a separate snapshot of the incoming small parts. Indicate whether contacts and a cover are needed or whether part of the accessories remain from the existing installation. Factory numbers of individual parts are useful for matching the composition, but in themselves do not prove the possibility of replacing the entire set with any similar detail.

What to Apply to a Replacement Request

  • Marking the installed AIS and a photo of the removable connector.
  • Photo of the mounting location and information about the retained cable.
  • Reason for replacement: mechanical damage, corrosion, loss of contacts or cover.
  • The list of necessary parts and the agreed amount of inspection after installation.

If you order a ready mounted unit, separately list the cable, length, response connections and installation work. The name Pilot Plug in the factory list of accessories does not specify the length of an arbitrary marine cable and does not mean that the cable is already finished for your installation.

Verification upon receipt and after installation

When accepting, compare the labeling and actual parts with the quotation inventory. Inspect the flange, body, contacts and cover. Checking the cable and data transmission after installation are agreed separately: a new connector and a restored working connection are different results of acceptance.

Installation is performed according to the documentation of a specific configuration AIS. This technical guide does not include a link: the location and purpose of contacts should be taken from the applicable manual, taking into account the side of the connector type indicated in it.

Card and documents

Supply and coordination

In the warehouse card 67-135974 marked one new copy, the price in the card of goods. Availability, actual kit contents and final cost are confirmed by a written quotation.

Price and term - by quotation for the agreed composition. Specify the port or city, the required date, documents and method of acceptance. A mark in the catalog helps to select a position for the request; the actual balance and reserve are confirmed before the order.

Request a quote

Select a different theme for the technical guide