SAILOR CB4616 / 80461601: D-SUB 9 to terminal-block connection box
SAILOR CB4616, article 80461601, is a connecting box for switching from D-SUB 9 to screw terminals. It is necessary for installation of cable connections of the existing station. Thrane & Thrane’s factory listing is the Connection box SUB D-9 to terminal block conversion.
What is the problem with CB4616?
The SAILOR System 5000 technical manual describes the CB4616 as an affiliation to connect larger cables to a small D-SUB 9 connector. The box provides for securing the cable so that the mechanical load does not fall on the connection of the conductors.
The name Terminal Block Converter Box refers here to the transition to the terminal pad. It does not in itself mean a protocol conversion or replacement of a transceiver, message terminal, or power supply unit. When ordering, it is more useful to write “connecting box CB4616, 80461601” than the general “SAILOR terminal”.
Cable to CU or TU: what is included in the quotation
In the description of the factory supply, a meter cable D-SUB - D-SUB is indicated for connection to the CU or TU. This is a benchmark for checking the kit, not the promise of having such a cable in each warehouse instance. Ask to list the box, connecting cable, response parts and fastener in separate lines.
If the cable remains on the ship, please indicate this in the request. To select, you need photos of its ends, marking and information about which blocks it is connected to. You should not choose a new cable only on the same nine-pin connector body: the appointment of contacts is checked according to the documentation of the actual installation.
CB4616 and CB4618 perform different tasks
In the same section of the manual, the CB4618 is called the Handset Connection Box: it is used to connect the corresponding telephone supplies. Similar box sizes and similar model numbers do not prove interchangeability. In the application for CB4616, keep both parts of the designation, model and article 80461601.
What to check with the established node
- Full box designation and marking of the station's connected units.
- Number of the applicable connection scheme and changes made on the ship.
- The state of the housing, connector, screw terminals and elements of securing the cable.
- The actual composition of the removable node: the box alone or together with the cables.
A general view photo helps to understand the installation, and large pictures of the marking and connector - to coordinate the configuration. If the replacement is caused by damage to the cable or contact, describe the defect separately. This will allow you to request the desired accessory, without including an extra transceiver or other large unit in the order.
Box acceptance and completeness
Before reserve, ask for photos of the proposed copy and a list of incoming accessories. In the quotation, record the condition of the product, the agreed amount of inspection and documents. The New label in the catalog does not replace the delivery inventory and does not confirm compatibility with any SAILOR station.
When receiving, compare the article and composition with the quotation. The cables to remain on the ship and the newly supplied parts are conveniently noted in one inventory. The connection is performed according to the applicable station documentation; the above scheme for the assignment of the box does not serve as an mounting pattern.
Card and documents
- SAILOR CB4616/80461601 in the RadarStation catalog
- SAILOR System 5000 MF/HF 150W FCC Technical Manual: Section 2-5, CB4616 and CB4618
- Thrane & Thrane Price Book: Article 80461601 and designation SAILOR CB4616; historical prices not used
Supply and coordination
The SAILOR CB4616/80461601 card contains two new copies. Catalog price in the product card; final cost, completeness and available balance are confirmed by quotation.
Price and term - by quotation for the agreed composition. Specify the port or city, the required date, documents and method of acceptance. A mark in the catalog helps to select a position for the request; the actual balance and reserve are confirmed before the order.