S.P. Radio SAILOR RT2048: keypad 625447 and interface board 625450
From SAILOR RT2048 you can look for a separate keyboard board, the main interface module or the entire front of the station. To agree on repairs, it is more useful to name a specific node than to ask for an RT2048 panel. Below are two basic modules that were not the subject of this model’s technical guide.
What numbers to look for
In the S.P. factory manual. Radio A/S M2048GB, Issue C/0549, Keyboard Unit is designated Module 1, Interface Unit, Module 2. In the Parts List, the manufacturer of these assemblies is ECI A/S.
| Assembly | Number. | What to distinguish |
|---|---|---|
| Keyboard Module RT2048 | 625447 | Keyboard matrix and key highlighting; type in the list - 5-0-25447 |
| Interface Module RT2048 | 625450 | Main interface, including control and indication circuits |
For 625450, the document contains several Type lines with different letter endings. One assembly number does not remove the issue of revision: the request must transfer the full marking of the installed board. Replacement without configuration is not promised here.
ALPS SKHCAD: component and board - different composition
In the detailing of the keyboard positions S1-1-S12-1 are switches ALPS SKHCAD (KHC 10904), 12×12 mm, part number 43.601. These are separate components of the 625447 board. The switch, the assembled keyboard and the front panel in the kit do not mean one delivery position.
If the service conclusion indicates a specific switch, attach its designation and the required number. If you need an assembly, separately list the expected set: board, connections, elements of the front part. The supplier needs an answer to this list, not just a photo of the station hull.
The same symptom does not determine the required board.
A broken key or no indication is a description of the observation, not a ready-made number for the order. For quotation, it is useful to indicate whether the problem is constantly reproduced, what functions are retained and whether there is a conclusion of a service specialist. The number of the purchased assembly will be agreed upon after such reconciliation.
Send the device to disassemble only for the sake of the application is not required. If there are no internal markings now, report the available information about the station and the task: ready-made backup apparatus, repair of an existing instance or a separate agreed node. This will allow you to first determine the subject of the quotation.
Where does this technical guide end?
The transmission boards and the combination of the RF module are considered separately: 60-127060, 60-127230 and Mitsubishi RA35H1516M. Basic control boards are selected here. When requesting a station with additional features, list them separately: the name RT2048 does not replace the inventory of installed equipment.
In the quotation, ask to record the full number, audit, condition and agreed verification of the purchased node. For the recovery device, determine in advance what should be serviceable during transfer and what works remain for the buyer. For ready working reserve, agree on the acceptance of the station in the assembly.
Card and documents
- SAILOR RT2048 / boards 625447 and 625450 in the catalog RadarStation
- S.P. Radio A/S: M2048GB, Issue C/0549; sections 5.1/5.2, Parts List7-1-7-3 (physical pages 75–77 PDF) – 625447,625450, ALPS SKHCAD
Supply and coordination
RadarStation’s own card lists two RT2048 Used and one recovery device; a reference point of 70,000 RUB. It's the rest of the radio. The presence of separately removed boards 625447/625450 and ALPS switches from it does not follow. Worker, repair fund and agreed separate node require different quotation.
Price and term - by quotation for the agreed composition. Specify the port or city, the required date, documents and method of acceptance. A mark in the catalog helps to select a position for the request; the actual balance and reserve are confirmed before the order.