SAILOR 6004: one terminal, different applications
There are already several independent systems on the bridge, and the operator needs a clear post to work with their applications. SAILOR 6004 is considered as such a control panel: a single display device for a agreed ThraneLINK composition. The buyer chooses not just another screen, but a workplace where the necessary windows are available and notifications from connected systems are clear.
Request a quote
One post for different tasks
SAILOR 6004 98-136644-C, dated June 27, 2013, describes the operation of multiple applications in separate windows. Notifications help the operator to monitor installed applications. Examples include the SAILOR 628x AIS, the SAILOR 6390 NAVTEX receiver and the SAILOR 100 Satellite TV.
For the project, this is the starting point, not the promise that any panel is immediately ready for all of the listed systems. They agree on the actual blocks, the necessary applications and their versions. Our position 406004A-00500 is to be considered together with a particular installation; availability of features is not inferred from the SAILOR label on the case.
Imagine a post where you need to read NAVTEX messages and use the AIS application provided. During normal operation, the operator switches between two tasks. The point of a common interface is to make this transition clear and keep the attention to notifications, rather than putting several unrelated displays side by side without a coordinated post organization.
Screen shared, systems independent
SAILOR 6004 does not become a NAVTEX receiver or AIS transponder. The panel provides an interface to the intended applications, while the corresponding hardware units perform their tasks. Combining work on a screen does not mean combining radio channels, antennas or transmitted data into one universal system.
This helps to formulate the request correctly. If only a missing control device is required for an already known composition, it is not necessary to automatically re-order all receivers. If a new post is created, on the contrary, the price of one panel does not describe the entire set. The saved and new parts are associated with the desired result of the operator.
| The challenge in office | What needs to be agreed |
|---|---|
| Reading NAVTEX | Actual receiver, application and required message path to the panel |
| Working with AIS | The specific AIS block, the applicable application and the available features of that configuration |
| Attention to other applications | Proposed notifications and their submission in an agreed configuration |
This table refers to the project of the workplace. It is not a permission to arbitrarily connect any equipment with two suitable connectors. The documentation and composition of a particular installation determine which systems will actually work together.
Windows and notifications are discussed together
When choosing, it is useful to describe the usual sequence of work: which application is used most of the time, which is returned periodically and which notifications should be distinguished. Then the quotation can be estimated by the real task, and not just by the diagonal of the screen. It is important for the operator to have access to the necessary information at the time of transition between windows.
The panel provides sound alarm and external alarm outputs. However, their assignment in a particular post needs to be aligned with the applicable applications and equipment. The presence of outputs does not mean that all events of any connected system are automatically transmitted in the same way. The necessary means of notification are described as a requirement for the project.
If a shared post replaces several separate display locations, it is separately determined what should remain available if the panel is not available. Multiple windows of a single device do not create multiple independent backup posts. This issue is useful to resolve before purchase, keeping the necessary existing display means or agreeing on a different composition for the task of the vessel.
What applications are included in the quotation
The manual distinguishes between applications, available panels on the current network, and already installed applications. These states cannot be considered the same when evaluating the proposed copy. The buyer needs an answer on the desired features and versions, not just the message “panel is turned on”.
For the current post, name the applications used, the linked block models, and known versions. For a new location, list the required tasks. Preparation of the software configuration and the necessary work are agreed separately, without assuming that the cost of the panel already includes the entire set of programs and the commissioning of the system.
Network arrangement is also part of the design. The cited manual revision specifies isolated internal communication between system components for GMDSS installations. Ethernet availability must therefore not be interpreted as permission to connect the station to an arbitrary shipboard or office network. The arrangement follows documentation and requirements for the particular installation; no connection or configuration instructions are provided here.
Panel and full post set
In your own card 406004A-00500 the price is indicated in the product card for SAILOR 6004. The actual condition, configuration, balance, inventory and price will be confirmed before ordering. This amount does not mean a ready-made system with NAVTEX, AIS, all applications and works.
The catalog OEM photo shows a panel with a support, but not an inventory of the current delivery. retained anchorages, power supply and accessories are listed at the current location; missing ones are included in the general quotation only according to the agreed composition. So you can see the price of a finished post without re-purchasing suitable parts.
In the request, specify the desired applications, hardware blocks and display organization. For delivery to Murmansk, St. Petersburg, Astrakhan, Vladivostok or another city, inform the place of equipment and the required date. A useful outcome of the discussion is a specific configuration of SAILOR 6004 for your work with multiple applications, with clear kit boundaries and total cost.
SAILOR 6004 in our catalogue
SAILOR 6004 - Control Panel 406004A-00500.
The current price is indicated in the product card. program preparation and work separately.
Request a quotePrimary sources: SAILOR 6004: manual 98-136644-C, 27 June 2013. The applicability of the manual editorial and software configuration to the proposed configuration is agreed before order.