Sperry Marine T65825816 and T65801809: X- and S-band power-supply boards
Sperry Marine T65825816 and T65801809 are different power supply boards from the radar range. The T65825816 is described as the X-band PSU AC and the T65801809 as the AC PSU PCB Assy S-band. When replacing, it is important to keep this distinction and complete configuration of the installed unit.
Check the section of the scheme and the composition of the block
The VisionMaster FT T65801809 refers to the Power Supply PCB Assembly S-band and the T65825816 is allocated to AC Mains Input in the corresponding X-band configuration. From this, it is impossible to deduce the interchangeability of two boards or the applicability of one position to all radars of the brand.
The request requires a radar model, the number of the receiver or antenna unit and the marking of the installed board. If the nameplate has a suffix or revision, they should be kept. Only the overall X/S range and similar location of the connectors do not determine the desired replacement.
Separate board from neighboring devices
Power supply board, incoming network filter and full power supply are different delivery boundaries. For nodes T65825822 and 65800823 there is a separate Technical Guide to Input Filter and Power Supply Unit. Here the task is already: to pick up exactly the board for the designation and configuration of the serviced unit.
If the malfunction is described as “no power supply”, a service conclusion about the desired node is required before the purchase. Purchasing a board only for such a symptom may not correspond to the actual place of withdrawal. This technical guide does not offer measurements or self-inclusion inside the equipment.
What is the status of the quotation
Once-in-service board and refurbishment charges require different order conditions. For the repair fund, separately agree on the restoration, inspection, final result and responsibility for the work. For the finished instance, ask for information about the tests carried out and confirmation of applicability to your configuration.
- Full article and revision of the proposed board.
- Status before delivery and list of agreed works.
- Photos of marking and actual copy.
- Scope of supply: only board or additional items.
- Check after installation and necessary documents.
Formulate an order on two separate lines
If you need a margin for different ships, do not combine the X-band and S-band boards into one undefined "PSU Sperry" position. Specify the system for each line, the number and the required state. For the second board open card T65801809.
So you can compare the quotation with the same boundaries and do not accept the set for recovery for ready to install power supply in the collection.
Card and documents
Supply and coordination
For T65825816, the catalog shows a former in-service specimen and a recovery position; for T65801809, a recovery position. Installation readiness and actual balance are confirmed separately.
Price and term - by quotation for the agreed composition. Specify the port or city, the required date, documents and method of acceptance. A mark in the catalog helps to select a position for the request; the actual balance and reserve are confirmed before the order.