Home » Articles and guides TT-3606E: Restoring the Workplace

TT-3606E: restoring the operator station

An existing Inmarsat-C post can retain a suitable transceiver, and a replacement requires a message terminal: a screen with its own controls and application. For such an order, the TT-3606E is considered a specific workplace node. You need a kit with which you can continue the intended work with messages, and not just a device on which the display lights up.

Request a quote
Catalogue photo of the TT-3606E terminal with a keyboard
Catalogue photo of Thrane & Thrane TT-3606E with a keyboard and side view from a factory brochure. Not a photo of the proposed copy and not a confirmation of scope of supply.

First, determine what remains.

Imagine a ship with a valid TT-3020C and terminal TT-3606E, which was decided to be replaced after the conclusion of the responsible specialist. The buyer wants to keep the suitable parts of the installation and get a quotation for the missing. It is reasonable to start with the designations of the existing blocks and the application used by the operator. The fact that the screen malfunction does not determine that you need to buy the entire satellite set.

In the factory brochure TT-3606E directly named transceivers TT-3020C GMDSS and TT-3022D Fishery. These are specific applications, not the promise of a terminal with any Inmarsat-C hardware. In our example, the retained TT-3020C is known, but quotation still requires configuration and system-specific data. If another transceiver is on board, the applicability is confirmed separately from the documentation relating to it.

Useful source material - photos of markings, the name of the application used and a brief description of the usual work: preparation of outgoing texts, reading of incoming messages, required printing. Messages, passwords and service communication data are not necessary for the first request. This way, the discussion remains substantive and does not become a transfer of the ship’s working archive.

The terminal and the application are selected together

The TT-3606E has its own computing platform. The manufacturer's archive manual separately refers to the documentation of a specific application program and explains that the use of hardware capabilities depends on the installed application. Therefore, the quotation “terminal is included” and the quotation “terminal corresponds to the agreed task of the post” describe different results.

The buyer should name the existing application and ask to confirm what exactly is offered with this instance: only the hardware part or the agreed software configuration. If there is no information about the previous software, this is a separate open question for the performer. The name TT-3606E on the case does not replace the answer, and the presence of the program should not be assumed from the photo of the display.

For the same reason, a regular computer does not automatically become a replacement. Compare a specific solution with the desired application, interfaces and installation requirements. The purchase of the TT-3606E does not mean that the cost already includes the preparation of the entire system, communication services or the processing of necessary documents. The composition of the equipment and individual works are agreed in one quotation to see the full price of the chosen path.

Keyboard – part of the workplace

The factory materials separately show the operator keyboard TT-3601E. The OEM photo in this technical guide shows the terminal along with the keyboard, but this is a catalogue illustration. It does not describe the inventory of the proposed in-service specimen.

If a suitable keyboard is already on the ship, it does not need to be included in the re-purchase. It is enough to specify the exact designation and coordinate its preservation. If there is no keyboard, the request is formulated as a set of terminals with the provided input means and the necessary accessories. A connector of a similar appearance in another keyboard does not in itself confirm the required configuration and applicability.

This approach helps to compare two meaningful quotations: to replace only the missing node or to obtain an agreed operator kit. Comparing the prices of individual boxes without this boundary says little about the amount after which the workplace will be staffed.

Archival update on TT-3601E. In the manual Thrane & Thrane TT98-107880-E from 1 November 2005 year, section 3.4.2It is stated that the keyboard TT-3601E terminal-powered TT-3606E. Although the keyboard connector is called standard, in the GMDSS configuration described there, the manufacturer indicates approval. TT-3601E. This is a specific limitation of the historical system. TT-3020C/TT-3606E: The matching connector of an arbitrary keyboard does not confirm its suitability for the same application. The archive record cannot be carried over to all modern configurations or considered a valid universal approval of any proposed kit. To order, retain the full keyboard designation and confirm applicability to the actual system. Source: manual TT-3020C, TT98-107880-E, archival copy.

What should happen to the printer?

The brochure provides a parallel printer interface. However, the presence of this interface does not prove that any printer and any printing path is suitable for a particular installation. The desired result is described in advance: which print is saved, which hardware is already in use, and what the contractor must confirm for the selected application and system.

If the printing is not part of the task of replacing the terminal, it is still useful to name its existing composition. Then the supplier will not consider the printer missing or offer an extra purchase. If you want to restore this part of the post, it is included in a separate clear line in the general set. Here it is enough to coordinate the result; sizing, connection and actions with the equipment are performed according to the applicable documentation by the responsible specialist.

Quotation for a specific copy

The RadarStation card denotes TT-3606E / 4033606E as Used and shows the price with the price in the product card. This is the reference point of the hardware position on the card. It does not equal the cost of a fully prepared workplace with keyboard, software, printing and work. The declared warehouse balance does not mean an automatic reserve for the application: availability, condition and actual completeness are confirmed by quotation.

To order, you need a clear result: what terminal is supplied, what remains on the ship, what application is agreed and what accessories are really required. Ask for one total price of the selected kit with separately designated works and delivery. For St. Petersburg, Vladivostok, Murmansk or another port, specify the place of receipt and the date required; the route and term are confirmed for the specific quotation.

TT-3606E in our catalogue

TT-3606E/4033606E - Message Terminal, Used.

with the price in the product card - the reference point of the hardware position on the card. The status, actual reserve, program configuration and inventory of a particular instance are confirmed by quotation. Keyboard, necessary accessories and works - according to the agreed general composition. This is not the price of a fully-built Inmarsat-C system.

Request a quote

Primary documents: Thrane & Thrane TT-3606E Message Terminal - brochure, v1.1 04/2012 · Thrane & Thrane TT-3606E - Archival Manual, 04.03.1998. Archival information is applied to the agreed configuration.

All technical guide RadarStation