SAILOR 6588: using a second position source
The ship already has a coordinate source, but the owner wants to add a second one so that the connected devices do not remain without agreed data when one receiver fails. Buying a new SAILOR 6588 is just one of those things. It is necessary to determine in advance which consumers will receive the second source and how they will use it. Otherwise, an additional device will appear on board, and the existing reserve for the desired workplace will not work.
Request a quote
The spare unit and the operating source solve different tasks
Let's present two quotations. In the first supply receiver, which will be stored as a replacement. In the second set, the second set is permanently included in the system and provided by the project as an additional source of position. The same product name does not make these quotations equivalent: the composition, preparation of the installation and the expected result differ.
For the warehouse, the task is clear: to maintain the agreed configuration, documents and readiness for subsequent replacement. For the current second source, the entire data path to specific devices is important. Therefore, in the application it is better to write “need a reserve position for listed consumers”, rather than simply increase the number of receivers to two. So the discussion begins with the desired function, not with an extra box.
What is provided for SAILOR 6588
Manual 98-145263-C describes a multi-receiver system with two or three GNSS/DGNSS receivers that can be controlled from the SAILOR 6004 panel. Primary, Secondary and Tertiary roles are provided for identification. In the illustrated embodiment, each receiver outputs positional information via serial ports. This confirms the availability of an appropriate system construction option, but not the readiness of any proposed delivery for your project.
The role of the receiver is useful for distinguishing sources and messages about them. It does not equal the promise that any connected radar, AIS, or mapping system will automatically select the data it wants. The capabilities of the receiving equipment are confirmed by its own documentation. This is where the boundary between buying a second SAILOR 6588 and agreeing on a working backup solution runs.
Start with a really important customer.
For example, first of all, it is necessary to provide an additional source for a specific navigation device, and the rest of the connections want to save. Start with its exact model, available inputs, and existing source. Separately indicate whether manual selection or automatic switching is expected. The method of selection must be confirmed for that consumer, not derived from the presence of a second connector.
Then the same question is considered for the next device. If one receives data on a serial line and the other through a network, the same pattern of behavior cannot be implied without verification. The agreed description should identify the source, recipient and expected result when the primary source is not available. This allows you to see the unclosed part of the task before ordering the equipment.
Network redundancy does not replace receiver redundancy
In the factory note 95-141788-A redundant Ethernet topologies are considered as a way to improve the stability of communication between listed SAILOR devices in case of network line failure. The document separately limits its scope and refers the connection of third-party equipment to the relevant manuals. Therefore, the presence of a ring or two network connectors does not confirm the reservation of the very position and behavior of each consumer.
Discuss these issues separately: do you need a different data path, a second coordinate source, or both? A pair of devices also does not prove the independence of a system if common elements are maintained. Antennas, power supply, and other common parts should be explicitly shown in the project. The additional receiver itself does not promise to save the satellite signal in case of interference or a problem in the general part of the installation.
How to compare quotation by one result
Ask to describe the retained installation and the added kit together. The receiver, antenna part, panel, necessary means of connection and operation are included only according to the agreed list. If the existing panel or other serviceable parts are suitable for the project, they remain a retained equipment. You don’t need to buy them for the same boxes.
A useful result of the agreement is a clear story for each selected consumer: where the basic data come from, what second source is provided and what the responsible operator should see when the availability of sources changes. Verification of this story is carried out by the profile performer in the agreed conditions. The article does not specify the order of shifting on the ship and does not replace navigation or installation instructions.
Request a set for an existing installation
In our SAILOR 6588 card, article 406588A-00500, the price is indicated on the product card. It relates to the receiver; the composition of the backup solution, the price of the entire set, the availability and term are confirmed by a separate quotation. Catalogue mark does not mean a reserve of a specific quantity for your order. For delivery to St. Petersburg, Vladivostok or another city, specify the point of receipt and the location of the installation.
The factory illustration shows an example of a system with a receiver, antenna and panel. It helps to understand the class of equipment, but does not show the proposed warehouse lot and does not establish the composition of the purchase. Send a description of the required current reserve: this will refer to the associated system, not just the ability to ship another unit.
Questions about the existing reserve
Will the second SAILOR 6588 automatically switch all the devices to itself?
There is no such general promise. The role of the receiver and the ability to select data are confirmed separately for each consumer and the agreed configuration.
Is it enough to have an Ethernet backup ring instead of a second source?
These are different tasks: the network path reserve is not the receiver’s reserve. The required result and the general elements of the system are considered separately in the project.
Main product for the project
SAILOR 6588 - receiver, article 406588A-00500
with the price on the product page as a reference for the receiver. Availability, condition, configuration and documents are confirmed by quotation. The antenna, panel and other parts of the factory illustration are not considered included without a list. The total price of the agreed solution with the transfer of data to selected consumers, the necessary parts and separately agreed works is requested according to the composition of the project.
Request a quotePrimary sources: Cobham: SAILOR 6588, manual 98-145263-C — multi-receiver system and connected equipment · Cobham:95-141788-A - SAILOR network redundancy limits · Cobham: SAILOR657X brochure with factory illustration. The possibilities of the project and specific delivery are confirmed by the applicable versions of the documentation.