MSF1422B: a 6 kW magnetron and transmitter-component specifications
MSF1422B is a separate magnetron of a transmitting radar station. In its own RadarStation card, it is presented as a 6 kW X-band component. For the buyer, not only these two characteristics are significant: the technical sheet distinguishes the output power, the input anode power and the measurement conditions. This description allows you to form the exact subject of the purchase, preserving the current transmitter and transferring the technical part of the solution to the service specialist.
Request a quote
Specific model for transmitting node
The MSF1422B factory sheet specifies a fixed frequency range of 9380–9440 MHz. This is the characteristic of the component itself. It does not mean that the part fits any marine radar with the designation X-band. The name of the installed magnetron, the transmitter model, and the applicable documentation remain the basis of the selection; range matching does not replace this information.
If the supply has received the application “magnetron 6 kW”, it is useful to clarify it before asking for a price. You need an exact designation from the sheet or marking and a model of the unit for which the part is purchased. The quotation on MSF1422B will then apply to a particular product. Purchasing a full scanner, modulator, or restoring the entire radar will require a different scope of supply.
Why do 6 and 6.5 kW appear in the same sheet?
The MSF1422B introductory description gives peak output power of 6 kW. The electrical table gives a minimum of 6.0 kW and a typical value of 6.5 kW for the same parameter. Note 2 relates the measurement to a specified test condition. The tabulated typical value cannot therefore become an unconditional guarantee for any operating mode of the installed radar.
For a commercial specification, it is important to preserve the model, and for technical comparison, the purpose of the string and its conditions. Two quotations do not become different models just because one seller repeated the introductory 6 kW and the other selected the typical number from the table. The reverse is also incorrect: the close power of another magnetron does not confirm its applicability instead of MSF1422B.
Input power refers to the other side of the component
The limiting-parameters section separately specifies 30 kW peak anode input power. This is neither microwave output power nor continuous consumption from the ship supply. Do not enter this figure instead of the 6 kW output in an enquiry: that changes the meaning of the component description even though the designation on the document cover remains unchanged.
The same section contains pulse-operation limits. These must be considered together with transmitter documentation, rather than as freely selectable settings. The practical procurement step is to provide the exact sheet to the service organisation. These data do not imply instructions for independently changing the high-voltage circuit, pulse shape or heater; such work follows applicable equipment documentation.
Detail and its surroundings on radar
The magnetron works inside the transmitting system. Component health and the performance of the entire radar are related but different contract items. When buying a spare part, you can agree on the delivery of MSF1422B and the documents for it. If you need a complete result of repairs, separate diagnostics of other nodes, installation and inspection in the station.
This is especially useful for a ship that is outsourced to the shore service. The ship reports the designated designation and set of documents, the supply receives a quotation for a certain position, and the specialist confirms its use in the stored transmitter. The price of the component remains clear and does not mix with the previously unknown volume of plant recovery.
What is confirmed by the catalog photo
The photo shows a metal case with the designation JRC, MSF1422B label and wired terminals. This is a real image of the model, not a diagram of the transmitting node. It helps to compare the appearance, but does not confirm the actual condition of the sent copy, its release date, production or verification results.
In the used two-page technical sheet there is a designation MSF1422B marker 96-3. This marker should not be issued as a modern edition, the date of manufacture of the goods or the term of its warranty. Documents of specific delivery are agreed separately. A similar case with a different ending on the label should also not silently fall into the order called MSF1422B.
Price and agreed delivery package
In the card, the price is indicated in the product card and the mark of warehouse shipment. The designation New JRC refers to the manufacturer; condition, current balance, price and term are confirmed in writing. For the calculation, specify the number of MSF1422B, radar and transmitting node, required documents, accessories and port or city of receipt. The quotation fixes the total cost of the selected composition. Installation, diagnostics, inspection of the station and delivery are calculated separately from the price of the magnetron.
MSF1422B in our catalogue
The current price is indicated in the product card. warehouse delivery is indicated. The current price, availability, condition, configuration, documents and term are confirmed by letter. Fastening, response parts, work and delivery are included only according to the agreed composition; its total cost is indicated.
Adjacent catalogue entry: MSF1425B A separate type of different power, with no promise of replacing MSF1422B. Its own technical guide.
Request a quotePrimary source: MSF1422B, X-Band Magnetron - accurate factory sheet from our catalogue, marker96-3.