SAILOR 6391: NAVTEX reception and operator station
SAILOR 6391 is chosen for the NAVTEX marine reception post: coastal messages must not only be received, but also presented to the operator at the workplace. In this system, the SAILOR 6390 receiver and the SAILOR 6004 panel serve different roles. This architecture allows you to discuss the entire path of the message – from the antenna to reading on the bridge – and agree on a certain set of equipment.
Request a quote
What the NAVTEX system does
In the Cobham 71-139836-A04 factory sheet for August 2014 for SAILOR 6391, simultaneous reception at 490, 518 and 4209.5 kHz is described. This is receiving NAVTEX messages; the system does not become a voice radio or email terminal. Its task on the ship is related to incoming navigation and meteorological information.
Simultaneous reception of three frequencies is useful to distinguish from manual selection of one channel at a time. The number of frequencies in itself does not promise to receive any onshore transmission at any point. For the project, it is necessary to agree on the antenna, the actual installation site and the operating conditions of the equipment. The area of operation should be described in the application, not replaced by the general phrase “worldwide communication”.
Receiver and operator workplace
SAILOR 6390 is a hardware receiving unit. SAILOR 6004 is a seven-inch touchscreen panel through which the operator works with the NAVTEX application. As part of the system, these parts are connected by LAN, and their placement can be considered separately. On the bridge, you need an accessible message reading interface; the receiving unit is located according to the project of equipment and cable connections.
This explains the difference between buying 6391 and ordering a separate part. When a new post is created, both basic devices and necessary accessories must be identified. When the operating unit is restored, it is first found out which unit is to be replaced and which parts are retained. One panel 6004 does not replace the receiver 6390, and the price of an individual device is not the price of the entire system.
The work of 6004 with multiple applications is already covered in a separate technical guide. Here, the specific result is important: NAVTEX messages from the agreed receiver are available to the operator. The capabilities of other devices and applications are not automatically added to the kit just because the same panel is used.
Selection of communications and posting
The manufacturer’s description provides sorting and filtering of NAVTEX messages. For a new workplace, it is useful to determine in advance how the crew will view the information received and what presentation tools are needed in the installed configuration. This is the task of organizing a post, not an excuse to buy an additional display without understanding its role.
In the same sheet, support for the printer through the LAN is indicated. Interface support does not mean a printer included in any delivery. If a ship requires a paper output, it is explicitly included in the request and the applicable model, the necessary connections and the overall composition are agreed upon. If the screen view is sufficient, the printer that is missing in the task should not be added to the price.
Antenna, power supply and existing equipment
The manufacturer indicates support for active and passive antennas. What option is needed for a particular vessel, decide taking into account the existing equipment and project. Before ordering, it is useful to inform the model of the installed antenna, the state of the retained cable line and the known composition of the existing NAVTEX post. This information allows you to distinguish the purchase of a new solution from the restoration of one part.
The receiver and panel have their own power supply and placement requirements. Therefore, the quotation on the set should take into account both blocks; you can not evaluate the entire post by the characteristics of only one of them. The reconciliation of power supply, mounts, cables, and software configurations relates to a particular installation. Instructions for connecting or changing equipment settings are not given here.
If an exchange with an existing integrated navigation system or GPS data input is required, it is also specified as a separate requirement. The presence of a LAN or NMEA in the description does not prove ready-made compatibility with every marine consumer. For quotation, you need models of connected devices and the required exchange functions, not just the same connector names.
What delivery to request
The personal card 406391A-00500 is called the NAVTEX SAILOR 6391 system and shows the price in the product card. Actual balance, condition, configuration, documents, inventory and price are confirmed by quotation. This catalog does not replace the list of parts shipped. The response must explicitly list the receiver, panel and agreed accessories, or a specific individual node if the spare part is purchased.
For a complete solution, request the total price of the agreed kit; work and delivery are discussed separately. Specify the area of operation, the equipment to be retained, the city and the point of transfer – for example, St. Petersburg, Murmansk, Vladivostok or the port of Kazakhstan. The quotation will then be linked to a real marine post, not just a single NAVTEX name. The catalog OEM photo illustrates the system architecture and is not an inventory of today’s shipment.
SAILOR 6391 in our catalogue
SAILOR 6391 - NAVTEX system, 406391A-00500.
The current price is indicated in the product card. the cost of an individual node is not the price of the finished post. Work and delivery separately.
Request a quotePrimary source: Cobham: SAILOR 6391, Product Sheet 71-139836-A04, 08.14.
SAILOR 6004: several applications · All technical guide RadarStation