Thrane & Thrane TT-3020C / 403020C: GPS option and NMEA input

Thrane & Thrane TT-3020C is a separate Maritime Capsat transceiver for the Inmarsat-C post. In our card it passes under the article 403020C. When replacing this unit, it is useful to specify the coordinate source in advance: the built-in GPS is provided by the documentation as an option, so the TT-3020C name alone does not determine the composition of a particular instance.

Request a quote

TT-3020C: Optional GPS and NMEA external input
Conditional Role Scheme for the Archival Manual of Thrane & Thrane. Not a photo of the proposed unit and not a wired connection scheme.

Built-in GPS: first confirm configuration

In the manufacturer's manual TT98-107880-E dated November 1, 2005, section 2.6 is called Built-in GPS (optional). It describes the factory installation of the module; subsequent equipment is proposed to be coordinated through the supplier. The buyer should get a confirmation of the GPS option from the selected block before comparing the price.

If the operating installation is retained, specify the designation of the transceiver to be removed and from where it received the position. For a working reserve, write down the same configuration as a separate requirement. This will help to distinguish the replacement of the agreed instance from the quotation of an apparently similar block with a different composition.

External data entry and output – different conditions

Section 2.5.3 of the same manual describes NMEA 0183 on I/O X4. In the absence of a built-in GPS or during the search for satellites, it is provided to receive the external navigator messages specified by the manufacturer. The output of navigation data of the internal GPS is described separately, taking into account its mode.

In the archival description, an empty GLL string is possible in the absence of built-in GPS or before the module is launched. One such line cannot conclude that the installed GPS is defective. For quotation and verification, you need to know the actual configuration and source status.

What to show in an agreed inspection

For acceptance, formulate the expected result: the block receives coordinates from the intended source, and the desired consumer receives the agreed data. Specify which device remains the source, what output data is needed and what should be shown by the performer. The inclusion of the body itself does not answer these questions.

If you buy a set with internal GPS, in the inventory and the result of the check should be clear this configuration. If you keep an external navigator, name the model and the existing line. Position verification, messaging, and commissioning of satellite communications have different results; the necessary work is included in the quotation in separate lines.

Preserved post and order composition

The TT-3606E Message Terminal has already been considered in the separate technical guide of the workplace. Here, the subject of the order is the transceiver and its position source. In the application, list the retained terminal, antenna and cables, the desired state of the unit and the place of receipt. Archive documentation is checked against actual hardware and software versions; accessories and works are calculated according to the selected configuration.

Card and documents

Supply and coordination

Own TT-3020/403020C card shows New · 1 and Used · 1, the price in the product card. Configuration, status, actual reserve, kit and applicability to the retained installation are confirmed quotation; the price refers to the specified item and not to the entire Inmarsat-C post.

Price and term - by quotation for the agreed composition. Specify the port or city, the required date, documents and method of acceptance. A mark in the catalog helps to select a position for the request; the actual balance and reserve are confirmed before the order.

Request a quote

Select a different theme for the technical guide